rsyslog/rsyslog
1
0
Fork 0
mirror of https://github.com/rsyslog/rsyslog.git synced 2025-12-18 21:30:42 +01:00
Code Issues Packages Projects Releases Wiki Activity
rsyslog/syslogd.c
Rainer Gerhards 4e6bba7df8 created first version of imtcp (still very much depending on syslogd.c for 
configuration and a lot of other things)
2007-12-21 14:37:50 +00:00

6065 lines
186 KiB
C
Raw Blame History

/**
* \brief This is the main file of the rsyslogd daemon.
*
* Please visit the rsyslog project at
*
* http://www.rsyslog.com
*
* to learn more about it and discuss any questions you may have.
*
* Please note that as of now, a lot of the code in this file stems
* from the sysklogd project. To learn more over this project, please
* visit
*
* http://www.infodrom.org/projects/sysklogd/
*
* I would like to express my thanks to the developers of the sysklogd
* package - without it, I would have had a much harder start...
*
* Please note that I made quite some changes to the orignal package.
* I expect to do even more changes - up
* to a full rewrite - to meet my design goals, which among others
* contain a (at least) dual-thread design with a memory buffer for
* storing received bursts of data. This is also the reason why I
* kind of "forked" a completely new branch of the package. My intension
* is to do many changes and only this initial release will look
* similar to sysklogd (well, one never knows...).
*
* As I have made a lot of modifications, please assume that all bugs
* in this package are mine and not those of the sysklogd team.
*
* As of this writing, there already exist heavy
* modifications to the orginal sysklogd package. I suggest to no
* longer rely too much on code knowledge you eventually have with
* sysklogd - rgerhards 2005-07-05
* The code is now almost completely different. Be careful!
* rgerhards, 2006-11-30
*
* This file is part of rsyslog.
*
* Rsyslog is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Rsyslog is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Rsyslog. If not, see <http://www.gnu.org/licenses/>.
*
* A copy of the GPL can be found in the file "COPYING" in this distribution.
*
* This Project was intiated and is maintained by
* Rainer Gerhards <rgerhards@hq.adiscon.com>. See
* AUTHORS to learn who helped make it become a reality.
*
* If you have questions about rsyslogd in general, please email
* info@adiscon.com. To learn more about rsyslogd, please visit
* http://www.rsyslog.com.
*
* \author Rainer Gerhards <rgerhards@adiscon.com>
* \date 2003-10-17
* Some initial modifications on the sysklogd package to support
* liblogging. These have actually not yet been merged to the
* source you see currently (but they hopefully will)
*
* \date 2004-10-28
* Restarted the modifications of sysklogd. This time, we
* focus on a simpler approach first. The initial goal is to
* provide MySQL database support (so that syslogd can log
* to the database).
*
* rsyslog - An Enhanced syslogd Replacement.
* Copyright 2003-2007 Rainer Gerhards and Adiscon GmbH.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* A copy of the GPL can be found in the file "COPYING" in this distribution.
*/
#include "config.h"
#include "rsyslog.h"
#ifdef __FreeBSD__
#define BSD
#endif
/* change the following setting to e.g. 32768 if you would like to
* support large message sizes for IHE (32k is the current maximum
* needed for IHE). I was initially tempted to increase it to 32k,
* but there is a large memory footprint with the current
* implementation in rsyslog. This will change as the processing
* changes, but I have re-set it to 1k, because the vast majority
* of messages is below that and the memory savings is huge, at
* least compared to the overall memory footprint.
*
* If you intend to receive Windows Event Log data (e.g. via
* EventReporter - www.eventreporter.com), you might want to
* increase this number to an even higher value, as event
* log messages can be very lengthy.
* rgerhards, 2005-07-05
*
* during my recent testing, it showed that 4k seems to be
* the typical maximum for UDP based syslog. This is a IP stack
* restriction. Not always ... but very often. If you go beyond
* that value, be sure to test that rsyslogd actually does what
* you think it should do ;) Also, it is a good idea to check the
* doc set for anything on IHE - it most probably has information on
* message sizes.
* rgerhards, 2005-08-05
*
* I have increased the default message size to 2048 to be in sync
* with recent IETF syslog standardization efforts.
* rgerhards, 2006-11-30
*
* I have removed syslogdPanic(). That function was supposed to be used
* for logging in low-memory conditons. Ever since it was introduced, it
* was a wrapper for dbgprintf(). A more intelligent choice was hard to
* find. After all, if we are short on memory, doing anything fance will
* again cause memory problems. I have now modified the code so that
* those elements for which we do not get memory are simply discarded.
* That might be a single property like the TAG, but it might also be
* a complete message. The overall goal of this code change is to keep
* rsyslogd up and running, while we sacrifice some messages to reach
* that goal. It also keeps the code cleaner. A real out of memory
* condition is highly unlikely. If it happens, there will probably be
* much more trouble on the system in question. Anyhow - rsyslogd will
* most probably be able to survive it and carry on with processing
* once the situation has been resolved.
*/
#define DEFUPRI (LOG_USER|LOG_NOTICE)
#define DEFSPRI (LOG_KERN|LOG_CRIT)
#define TIMERINTVL 30 /* interval for checking flush, mark */
#define CONT_LINE 1 /* Allow continuation lines */
#ifdef MTRACE
#include <mcheck.h>
#endif
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <stddef.h>
#include <ctype.h>
#include <limits.h>
#define GNU_SOURCE
#include <string.h>
#include <stdarg.h>
#include <time.h>
#include <dlfcn.h>
#include <sys/syslog.h>
#include <sys/param.h>
#ifdef __sun
#include <errno.h>
#else
#include <sys/errno.h>
#endif
#include <sys/ioctl.h>
#include <sys/wait.h>
#include <sys/socket.h>
#include <sys/file.h>
#include <sys/time.h>
#if HAVE_SYS_TIMESPEC_H
# include <sys/timespec.h>
#endif
#include <sys/resource.h>
#include <signal.h>
#include <netinet/in.h>
#include <netdb.h>
#include <fnmatch.h>
#include <dirent.h>
#include <glob.h>
#include <sys/types.h>
#include <arpa/nameser.h>
#include <arpa/inet.h>
#include <resolv.h>
#include "pidfile.h"
#include <assert.h>
#include <pthread.h>
#if HAVE_PATHS_H
#include <paths.h>
#endif
#ifdef USE_NETZIP
#include <zlib.h>
#endif
#include "srUtils.h"
#include "stringbuf.h"
#include "syslogd-types.h"
#include "template.h"
#include "outchannel.h"
#include "syslogd.h"
#include "net.h" /* struct NetAddr */
#include "sync.h" /* struct NetAddr */
#include "parse.h"
#include "msg.h"
#include "modules.h"
#include "action.h"
#include "tcpsyslog.h"
#include "iminternal.h"
#include "cfsysline.h"
#include "omshell.h"
#include "omusrmsg.h"
#include "omfwd.h"
#include "omfile.h"
#include "omdiscard.h"
#include "threads.h"
/* We define our own set of syslog defintions so that we
* do not need to rely on (possibly different) implementations.
* 2007-07-19 rgerhards
*/
/* missing definitions for solaris
* 2006-02-16 Rger
*/
#ifdef __sun
# define LOG_AUTHPRIV LOG_AUTH
#endif
#define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri))
#define LOG_PRI(p) ((p) & LOG_PRIMASK)
#define LOG_FAC(p) (((p) & LOG_FACMASK) >> 3)
#define INTERNAL_NOPRI 0x10 /* the "no priority" priority */
#define LOG_FTP (11<<3) /* ftp daemon */
#define INTERNAL_MARK LOG_MAKEPRI((LOG_NFACILITIES<<3), 0)
#ifndef UTMP_FILE
#ifdef UTMP_FILENAME
#define UTMP_FILE UTMP_FILENAME
#else
#ifdef _PATH_UTMP
#define UTMP_FILE _PATH_UTMP
#else
#define UTMP_FILE "/etc/utmp"
#endif
#endif
#endif
#ifndef _PATH_LOGCONF
#define _PATH_LOGCONF "/etc/rsyslog.conf"
#endif
#ifndef _PATH_MODDIR
#define _PATH_MODDIR "/lib/rsyslog/"
#endif
#if defined(SYSLOGD_PIDNAME)
#undef _PATH_LOGPID
#if defined(FSSTND)
#ifdef BSD
#define _PATH_VARRUN "/var/run/"
#endif
#ifdef __sun
#define _PATH_VARRUN "/var/run/"
#endif
#define _PATH_LOGPID _PATH_VARRUN SYSLOGD_PIDNAME
#else
#define _PATH_LOGPID "/etc/" SYSLOGD_PIDNAME
#endif
#else
#ifndef _PATH_LOGPID
#if defined(FSSTND)
#define _PATH_LOGPID _PATH_VARRUN "rsyslogd.pid"
#else
#define _PATH_LOGPID "/etc/rsyslogd.pid"
#endif
#endif
#endif
#ifndef _PATH_DEV
#define _PATH_DEV "/dev/"
#endif
#ifndef _PATH_CONSOLE
#define _PATH_CONSOLE "/dev/console"
#endif
#ifndef _PATH_TTY
#define _PATH_TTY "/dev/tty"
#endif
/* IPv6 compatibility layer for older platforms
* We need to handle a few things different if we are running
* on an older platform which does not support all the glory
* of IPv6. We try to limit toll on features and reliability,
* but obviously it is better to run rsyslog on a platform that
* supports everything...
* rgerhards, 2007-06-22
*/
#ifndef AI_NUMERICSERV
# define AI_NUMERICSERV 0
#endif
static uchar *ConfFile = (uchar*) _PATH_LOGCONF; /* read-only after startup */
static char *PidFile = _PATH_LOGPID; /* read-only after startup */
static uchar *pModDir = NULL; /* read-only after startup */
char ctty[] = _PATH_CONSOLE; /* this is read-only; used by omfile -- TODO: remove that dependency */
static pid_t myPid; /* our pid for use in self-generated messages, e.g. on startup */
/* mypid is read-only after the initial fork() */
static int debugging_on = 0; /* read-only, except on sig USR1 */
static int restart = 0; /* do restart (config read) - multithread safe */
static int bRequestDoMark = 0; /* do mark processing? (multithread safe) */
int glblHadMemShortage = 0; /* indicates if we had memory shortage some time during the run */
#define INTERNAL_NOPRI 0x10 /* the "no priority" priority */
#define TABLE_NOPRI 0 /* Value to indicate no priority in f_pmask */
#define TABLE_ALLPRI 0xFF /* Value to indicate all priorities in f_pmask */
#define LOG_MARK LOG_MAKEPRI(LOG_NFACILITIES, 0) /* mark "facility" */
/* definitions used for doNameLine to differentiate between different command types
* (with otherwise identical code). This is a left-over from the previous config
* system. It stays, because it is still useful. So do not wonder why it looks
* somewhat strange (at least its name). -- rgerhards, 2007-08-01
*/
enum eDirective { DIR_TEMPLATE = 0, DIR_OUTCHANNEL = 1, DIR_ALLOWEDSENDER = 2};
/* The following global variables are used for building
* tag and host selector lines during startup and config reload.
* This is stored as a global variable pool because of its ease. It is
* also fairly compatible with multi-threading as the stratup code must
* be run in a single thread anyways. So there can be no race conditions. These
* variables are no longer used once the configuration has been loaded (except,
* of course, during a reload). rgerhards 2005-10-18
*/
static EHostnameCmpMode eDfltHostnameCmpMode;
static rsCStrObj *pDfltHostnameCmp;
static rsCStrObj *pDfltProgNameCmp;
/* supporting structures for multithreading */
int bRunningMultithreaded = 0; /* Is this program running in multithreaded mode? */
static pthread_t thrdWorker;
static int bGlblDone = 0;
/* END supporting structures for multithreading */
static int bParseHOSTNAMEandTAG = 1; /* global config var: should the hostname and tag be
* parsed inside message - rgerhards, 2006-03-13 */
int bFinished = 0; /* used by termination signal handler, read-only except there
* is either 0 or the number of the signal that requested the
* termination.
*/
/*
* Intervals at which we flush out "message repeated" messages,
* in seconds after previous message is logged. After each flush,
* we move to the next interval until we reach the largest.
*/
int repeatinterval[] = { 30, 60 }; /* # of secs before flush */
#define MAXREPEAT ((int)((sizeof(repeatinterval) / sizeof(repeatinterval[0])) - 1))
#define REPEATTIME(f) ((f)->f_time + repeatinterval[(f)->f_repeatcount])
#define BACKOFF(f) { if (++(f)->f_repeatcount > MAXREPEAT) \
(f)->f_repeatcount = MAXREPEAT; \
}
#ifdef SYSLOG_INET
union sockunion {
struct sockinet {
u_char si_len;
u_char si_family;
} su_si;
struct sockaddr_in su_sin;
struct sockaddr_in6 su_sin6;
};
#endif
#define LIST_DELIMITER ':' /* delimiter between two hosts */
struct filed *Files = NULL; /* read-only after init() (but beware of sigusr1!) */
struct code {
char *c_name;
int c_val;
};
static struct code PriNames[] = {
{"alert", LOG_ALERT},
{"crit", LOG_CRIT},
{"debug", LOG_DEBUG},
{"emerg", LOG_EMERG},
{"err", LOG_ERR},
{"error", LOG_ERR}, /* DEPRECATED */
{"info", LOG_INFO},
{"none", INTERNAL_NOPRI}, /* INTERNAL */
{"notice", LOG_NOTICE},
{"panic", LOG_EMERG}, /* DEPRECATED */
{"warn", LOG_WARNING}, /* DEPRECATED */
{"warning", LOG_WARNING},
{"*", TABLE_ALLPRI},
{NULL, -1}
};
static struct code FacNames[] = {
{"auth", LOG_AUTH},
{"authpriv", LOG_AUTHPRIV},
{"cron", LOG_CRON},
{"daemon", LOG_DAEMON},
{"kern", LOG_KERN},
{"lpr", LOG_LPR},
{"mail", LOG_MAIL},
{"mark", LOG_MARK}, /* INTERNAL */
{"news", LOG_NEWS},
{"security", LOG_AUTH}, /* DEPRECATED */
{"syslog", LOG_SYSLOG},
{"user", LOG_USER},
{"uucp", LOG_UUCP},
#if defined(LOG_FTP)
{"ftp", LOG_FTP},
#endif
{"local0", LOG_LOCAL0},
{"local1", LOG_LOCAL1},
{"local2", LOG_LOCAL2},
{"local3", LOG_LOCAL3},
{"local4", LOG_LOCAL4},
{"local5", LOG_LOCAL5},
{"local6", LOG_LOCAL6},
{"local7", LOG_LOCAL7},
{NULL, -1},
};
static pid_t ppid; /* This is a quick and dirty hack used for spliting main/startup thread */
/* global variables for config file state */
static int bDropTrailingLF = 1; /* drop trailing LF's on reception? */
int iCompatibilityMode = 0; /* version we should be compatible with; 0 means sysklogd. It is
the default, so if no -c<n> option is given, we make ourselvs
as compatible to sysklogd as possible. */
int Debug; /* debug flag - read-only after startup */
static int bDebugPrintTemplateList = 1;/* output template list in debug mode? */
static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list in debug mode? */
static int bDebugPrintModuleList = 1;/* output module list in debug mode? */
int bDropMalPTRMsgs = 0;/* Drop messages which have malicious PTR records during DNS lookup */
static uchar cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */
static int bEscapeCCOnRcv; /* escape control characters on reception: 0 - no, 1 - yes */
static int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */
static int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */
static int logEveryMsg = 0;/* no repeat message processing - read-only after startup
* 0 - suppress duplicate messages
* 1 - do NOT suppress duplicate messages
*/
/* end global config file state variables */
static unsigned int Forwarding = 0;
char LocalHostName[MAXHOSTNAMELEN+1];/* our hostname - read-only after startup */
char *LocalDomain; /* our local domain name - read-only after startup */
int *finet = NULL; /* Internet datagram sockets, first element is nbr of elements
* read-only after init(), but beware of restart! */
static char *LogPort = "514"; /* port number for INET connections */
static int MarkInterval = 20 * 60; /* interval between marks in seconds - read-only after startup */
int family = PF_UNSPEC; /* protocol family (IPv4, IPv6 or both), set via cmdline */
int send_to_all = 0; /* send message to all IPv4/IPv6 addresses */
static int NoFork = 0; /* don't fork - don't run in daemon mode - read-only after startup */
static int AcceptRemote = 0;/* receive messages that come via UDP - read-only after startup */
int ACLAddHostnameOnFail = 0; /* add hostname to acl when DNS resolving has failed */
int ACLDontResolve = 0; /* add hostname to acl instead of resolving it to IP(s) */
int DisableDNS = 0; /* don't look up IP addresses of remote messages */
char **StripDomains = NULL;/* these domains may be stripped before writing logs - r/o after s.u., never touched by init */
char **LocalHosts = NULL;/* these hosts are logged with their hostname - read-only after startup, never touched by init */
int NoHops = 1; /* Can we bounce syslog messages through an
intermediate host. Read-only after startup */
static int Initialized = 0; /* set when we have initialized ourselves
* rgerhards 2004-11-09: and by initialized, we mean that
* the configuration file could be properly read AND the
* syslog/udp port could be obtained (the later is debatable).
* It is mainly a setting used for emergency logging: if
* something really goes wild, we can not do as indicated in
* the log file, but we still log messages to the system
* console. This is probably the best that can be done in
* such a case.
* read-only after startup, but modified during restart
*/
extern int errno;
/* This structure represents the files that will have log
* copies printed.
* RGerhards 2004-11-08: Each instance of the filed structure
* describes what I call an "output channel". This is important
* to mention as we now allow database connections to be
* present in the filed structure. If helps immensely, if we
* think of it as the abstraction of an output channel.
* rgerhards, 2005-10-26: The structure below provides ample
* opportunity for non-thread-safety. Each of the variable
* accesses must be carefully evaluated, many of them probably
* be guarded by mutexes. But beware of deadlocks...
* rgerhards, 2007-08-01: as you can see, the structure has shrunk pretty much. I will
* remove some of the comments some time. It's still the structure that controls much
* of the processing that goes on in syslogd, but it now has lots of helpers.
*/
struct filed {
struct filed *f_next; /* next in linked list */
/* filter properties */
enum {
FILTER_PRI = 0, /* traditional PRI based filer */
FILTER_PROP = 1 /* extended filter, property based */
} f_filter_type;
EHostnameCmpMode eHostnameCmpMode;
rsCStrObj *pCSHostnameComp; /* hostname to check */
rsCStrObj *pCSProgNameComp; /* tag to check or NULL, if not to be checked */
union {
u_char f_pmask[LOG_NFACILITIES+1]; /* priority mask */
struct {
rsCStrObj *pCSPropName;
enum {
FIOP_NOP = 0, /* do not use - No Operation */
FIOP_CONTAINS = 1, /* contains string? */
FIOP_ISEQUAL = 2, /* is (exactly) equal? */
FIOP_STARTSWITH = 3, /* starts with a string? */
FIOP_REGEX = 4 /* matches a regular expression? */
} operation;
rsCStrObj *pCSCompValue; /* value to "compare" against */
char isNegated; /* actually a boolean ;) */
} prop;
} f_filterData;
linkedList_t llActList; /* list of configured actions */
};
typedef struct filed selector_t; /* new type name */
/* support for simple textual representation of FIOP names
* rgerhards, 2005-09-27
*/
static char* getFIOPName(unsigned iFIOP)
{
char *pRet;
switch(iFIOP) {
case FIOP_CONTAINS:
pRet = "contains";
break;
case FIOP_ISEQUAL:
pRet = "isequal";
break;
case FIOP_STARTSWITH:
pRet = "startswith";
break;
case FIOP_REGEX:
pRet = "regex";
break;
default:
pRet = "NOP";
break;
}
return pRet;
}
/* Reset config variables to default values.
* rgerhards, 2007-07-17
*/
static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal)
{
cCCEscapeChar = '#';
bActExecWhenPrevSusp = 0;
bDebugPrintTemplateList = 1;
bDebugPrintCfSysLineHandlerList = 1;
bDebugPrintModuleList = 1;
bEscapeCCOnRcv = 1; /* default is to escape control characters */
bReduceRepeatMsgs = (logEveryMsg == 1) ? 0 : 1;
bDropMalPTRMsgs = 0;
if(pModDir != NULL) {
free(pModDir);
pModDir = NULL;
}
iMainMsgQueueSize = 10000;
#if defined(SYSLOG_INET) && defined(USE_GSSAPI)
if (gss_listen_service_name != NULL) {
free(gss_listen_service_name);
gss_listen_service_name = NULL;
}
#endif
return RS_RET_OK;
}
/* support for defining allowed TCP and UDP senders. We use the same
* structure to implement this (a linked list), but we define two different
* list roots, one for UDP and one for TCP.
* rgerhards, 2005-09-26
*/
#ifdef SYSLOG_INET
/* All of the five below are read-only after startup */
static struct AllowedSenders *pAllowedSenders_UDP = NULL; /* the roots of the allowed sender */
struct AllowedSenders *pAllowedSenders_TCP = NULL; /* lists. If NULL, all senders are ok! */
static struct AllowedSenders *pLastAllowedSenders_UDP = NULL; /* and now the pointers to the last */
static struct AllowedSenders *pLastAllowedSenders_TCP = NULL; /* element in the respective list */
#ifdef USE_GSSAPI
struct AllowedSenders *pAllowedSenders_GSS = NULL;
static struct AllowedSenders *pLastAllowedSenders_GSS = NULL;
#endif
#endif /* #ifdef SYSLOG_INET */
int option_DisallowWarning = 1; /* complain if message from disallowed sender is received */
/* hardcoded standard templates (used for defaults) */
static uchar template_TraditionalFormat[] = "\"%TIMESTAMP% %HOSTNAME% %syslogtag%%msg:::drop-last-lf%\n\"";
static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\"";
static uchar template_StdFwdFmt[] = "\"<%PRI%>%TIMESTAMP% %HOSTNAME% %syslogtag%%msg%\"";
static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\"";
static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL";
static uchar template_StdPgSQLFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-pgsql%', '%timegenerated:::date-pgsql%', %iut%, '%syslogtag%')\",STDSQL";
/* end template */
/* up to the next comment, prototypes that should be removed by reordering */
static void *singleWorker(); /* REMOVEME later 2005-10-24 */
/* Function prototypes. */
static char **crunch_list(char *list);
static void printline(char *hname, char *msg, int iSource);
static rsRetVal fprintlog(action_t *pAction);
static void reapchild();
static void debug_switch();
static rsRetVal cfline(uchar *line, selector_t **pfCurr);
static int decode(uchar *name, struct code *codetab);
static void sighup_handler();
static void die(int sig);
static void freeSelectors(void);
static rsRetVal processConfFile(uchar *pConfFile);
static rsRetVal selectorAddList(selector_t *f);
static void processImInternal(void);
/* Code for handling allowed/disallowed senders
*/
#ifdef SYSLOG_INET
static inline void MaskIP6 (struct in6_addr *addr, uint8_t bits) {
register uint8_t i;
assert (addr != NULL);
assert (bits <= 128);
i = bits/32;
if (bits%32)
addr->s6_addr32[i++] &= htonl(0xffffffff << (32 - (bits % 32)));
for (; i < (sizeof addr->s6_addr32)/4; i++)
addr->s6_addr32[i] = 0;
}
static inline void MaskIP4 (struct in_addr *addr, uint8_t bits) {
assert (addr != NULL);
assert (bits <=32 );
addr->s_addr &= htonl(0xffffffff << (32 - bits));
}
#define SIN(sa) ((struct sockaddr_in *)(sa))
#define SIN6(sa) ((struct sockaddr_in6 *)(sa))
/* This function adds an allowed sender entry to the ACL linked list.
* In any case, a single entry is added. If an error occurs, the
* function does its error reporting itself. All validity checks
* must already have been done by the caller.
* This is a helper to AddAllowedSender().
* rgerhards, 2007-07-17
*/
static rsRetVal AddAllowedSenderEntry(struct AllowedSenders **ppRoot, struct AllowedSenders **ppLast,
struct NetAddr *iAllow, uint8_t iSignificantBits)
{
struct AllowedSenders *pEntry = NULL;
assert(ppRoot != NULL);
assert(ppLast != NULL);
assert(iAllow != NULL);
if((pEntry = (struct AllowedSenders*) calloc(1, sizeof(struct AllowedSenders))) == NULL) {
glblHadMemShortage = 1;
return RS_RET_OUT_OF_MEMORY; /* no options left :( */
}
memcpy(&(pEntry->allowedSender), iAllow, sizeof (struct NetAddr));
pEntry->pNext = NULL;
pEntry->SignificantBits = iSignificantBits;
/* enqueue */
if(*ppRoot == NULL) {
*ppRoot = pEntry;
} else {
(*ppLast)->pNext = pEntry;
}
*ppLast = pEntry;
return RS_RET_OK;
}
/* function to clear the allowed sender structure in cases where
* it must be freed (occurs most often when HUPed.
* TODO: reconsider recursive implementation
*/
static void clearAllowedSenders (struct AllowedSenders *pAllow) {
if (pAllow != NULL) {
if (pAllow->pNext != NULL)
clearAllowedSenders (pAllow->pNext);
else {
if (F_ISSET(pAllow->allowedSender.flags, ADDR_NAME))
free (pAllow->allowedSender.addr.HostWildcard);
else
free (pAllow->allowedSender.addr.NetAddr);
free (pAllow);
}
}
}
/* function to add an allowed sender to the allowed sender list. The
* root of the list is caller-provided, so it can be used for all
* supported lists. The caller must provide a pointer to the root,
* as it eventually needs to be updated. Also, a pointer to the
* pointer to the last element must be provided (to speed up adding
* list elements).
* rgerhards, 2005-09-26
* If a hostname is given there are possible multiple entries
* added (all addresses from that host).
*/
static rsRetVal AddAllowedSender(struct AllowedSenders **ppRoot, struct AllowedSenders **ppLast,
struct NetAddr *iAllow, uint8_t iSignificantBits)
{
DEFiRet;
assert(ppRoot != NULL);
assert(ppLast != NULL);
assert(iAllow != NULL);
if (!F_ISSET(iAllow->flags, ADDR_NAME)) {
if(iSignificantBits == 0)
/* we handle this seperatly just to provide a better
* error message.
*/
logerror("You can not specify 0 bits of the netmask, this would "
"match ALL systems. If you really intend to do that, "
"remove all $AllowedSender directives.");
switch (iAllow->addr.NetAddr->sa_family) {
case AF_INET:
if((iSignificantBits < 1) || (iSignificantBits > 32)) {
logerrorInt("Invalid bit number in IPv4 address - adjusted to 32",
(int)iSignificantBits);
iSignificantBits = 32;
}
MaskIP4 (&(SIN(iAllow->addr.NetAddr)->sin_addr), iSignificantBits);
break;
case AF_INET6:
if((iSignificantBits < 1) || (iSignificantBits > 128)) {
logerrorInt("Invalid bit number in IPv6 address - adjusted to 128",
iSignificantBits);
iSignificantBits = 128;
}
MaskIP6 (&(SIN6(iAllow->addr.NetAddr)->sin6_addr), iSignificantBits);
break;
default:
/* rgerhards, 2007-07-16: We have an internal program error in this
* case. However, there is not much we can do against it right now. Of
* course, we could abort, but that would probably cause more harm
* than good. So we continue to run. We simply do not add this line - the
* worst thing that happens is that one host will not be allowed to
* log.
*/
logerrorInt("Internal error caused AllowedSender to be ignored, AF = %d",
iAllow->addr.NetAddr->sa_family);
return RS_RET_ERR;
}
/* OK, entry constructed, now lets add it to the ACL list */
iRet = AddAllowedSenderEntry(ppRoot, ppLast, iAllow, iSignificantBits);
} else {
/* we need to process a hostname ACL */
if (DisableDNS) {
logerror ("Ignoring hostname based ACLs because DNS is disabled.");
return RS_RET_OK;
}
if (!strchr (iAllow->addr.HostWildcard, '*') &&
!strchr (iAllow->addr.HostWildcard, '?') &&
ACLDontResolve == 0) {
/* single host - in this case, we pull its IP addresses from DNS
* and add IP-based ACLs.
*/
struct addrinfo hints, *res, *restmp;
struct NetAddr allowIP;
memset (&hints, 0, sizeof (struct addrinfo));
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_DGRAM;
# ifdef AI_ADDRCONFIG /* seems not to be present on all systems */
hints.ai_flags = AI_ADDRCONFIG;
# endif
if (getaddrinfo (iAllow->addr.HostWildcard, NULL, &hints, &res) != 0) {
logerrorSz("DNS error: Can't resolve \"%s\"", iAllow->addr.HostWildcard);
if (ACLAddHostnameOnFail) {
logerrorSz("Adding hostname \"%s\" to ACL as a wildcard entry.", iAllow->addr.HostWildcard);
return AddAllowedSenderEntry(ppRoot, ppLast, iAllow, iSignificantBits);
} else {
logerrorSz("Hostname \"%s\" WON\'T be added to ACL.", iAllow->addr.HostWildcard);
return RS_RET_NOENTRY;
}
}
for (restmp = res ; res != NULL ; res = res->ai_next) {
switch (res->ai_family) {
case AF_INET: /* add IPv4 */
iSignificantBits = 32;
allowIP.flags = 0;
if((allowIP.addr.NetAddr = malloc(res->ai_addrlen)) == NULL) {
glblHadMemShortage = 1;
return RS_RET_OUT_OF_MEMORY;
}
memcpy(allowIP.addr.NetAddr, res->ai_addr, res->ai_addrlen);
if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP, iSignificantBits))
!= RS_RET_OK)
return(iRet);
break;
case AF_INET6: /* IPv6 - but need to check if it is a v6-mapped IPv4 */
if(IN6_IS_ADDR_V4MAPPED (&SIN6(res->ai_addr)->sin6_addr)) {
/* extract & add IPv4 */
iSignificantBits = 32;
allowIP.flags = 0;
if((allowIP.addr.NetAddr = malloc(sizeof(struct sockaddr_in)))
== NULL) {
glblHadMemShortage = 1;
return RS_RET_OUT_OF_MEMORY;
}
SIN(allowIP.addr.NetAddr)->sin_family = AF_INET;
#ifdef HAVE_STRUCT_SOCKADDR_SA_LEN
SIN(allowIP.addr.NetAddr)->sin_len = sizeof (struct sockaddr_in);
#endif
SIN(allowIP.addr.NetAddr)->sin_port = 0;
memcpy(&(SIN(allowIP.addr.NetAddr)->sin_addr.s_addr),
&(SIN6(res->ai_addr)->sin6_addr.s6_addr32[3]),
sizeof (struct sockaddr_in));
if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP,
iSignificantBits))
!= RS_RET_OK)
return(iRet);
} else {
/* finally add IPv6 */
iSignificantBits = 128;
allowIP.flags = 0;
if((allowIP.addr.NetAddr = malloc(res->ai_addrlen)) == NULL) {
glblHadMemShortage = 1;
return RS_RET_OUT_OF_MEMORY;
}
memcpy(allowIP.addr.NetAddr, res->ai_addr, res->ai_addrlen);
if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP,
iSignificantBits))
!= RS_RET_OK)
return(iRet);
}
break;
}
}
freeaddrinfo (restmp);
} else {
/* wildcards in hostname - we need to add a text-based ACL.
* For this, we already have everything ready and just need
* to pass it along...
*/
iRet = AddAllowedSenderEntry(ppRoot, ppLast, iAllow, iSignificantBits);
}
}
return iRet;
}
#endif /* #ifdef SYSLOG_INET */
#ifdef SYSLOG_INET
/* Print an allowed sender list. The caller must tell us which one.
* iListToPrint = 1 means UDP, 2 means TCP
* rgerhards, 2005-09-27
*/
static void PrintAllowedSenders(int iListToPrint)
{
struct AllowedSenders *pSender;
uchar szIP[64];
assert((iListToPrint == 1) || (iListToPrint == 2)
#ifdef USE_GSSAPI
|| (iListToPrint == 3)
#endif
);
printf("\nAllowed %s Senders:\n",
(iListToPrint == 1) ? "UDP" :
#ifdef USE_GSSAPI
(iListToPrint == 3) ? "GSS" :
#endif
"TCP");
pSender = (iListToPrint == 1) ? pAllowedSenders_UDP :
#ifdef USE_GSSAPI
(iListToPrint == 3) ? pAllowedSenders_GSS :
#endif
pAllowedSenders_TCP;
if(pSender == NULL) {
printf("\tNo restrictions set.\n");
} else {
while(pSender != NULL) {
if (F_ISSET(pSender->allowedSender.flags, ADDR_NAME))
printf ("\t%s\n", pSender->allowedSender.addr.HostWildcard);
else {
if(getnameinfo (pSender->allowedSender.addr.NetAddr,
SALEN(pSender->allowedSender.addr.NetAddr),
(char*)szIP, 64, NULL, 0, NI_NUMERICHOST) == 0) {
printf ("\t%s/%u\n", szIP, pSender->SignificantBits);
} else {
/* getnameinfo() failed - but as this is only a
* debug function, we simply spit out an error and do
* not care much about it.
*/
dbgprintf("\tERROR in getnameinfo() - something may be wrong "
"- ignored for now\n");
}
}
pSender = pSender->pNext;
}
}
}
/* compares a host to an allowed sender list entry. Handles all subleties
* including IPv4/v6 as well as domain name wildcards.
* This is a helper to isAllowedSender. As it is only called once, it is
* declared inline.
* Returns 0 if they do not match, something else otherwise.
* contributed 1007-07-16 by mildew@gmail.com
*/
static inline int MaskCmp(struct NetAddr *pAllow, uint8_t bits, struct sockaddr *pFrom, const char *pszFromHost)
{
assert(pAllow != NULL);
assert(pFrom != NULL);
if(F_ISSET(pAllow->flags, ADDR_NAME)) {
dbgprintf("MaskCmp: host=\"%s\"; pattern=\"%s\"\n", pszFromHost, pAllow->addr.HostWildcard);
return(fnmatch(pAllow->addr.HostWildcard, pszFromHost, FNM_NOESCAPE|FNM_CASEFOLD) == 0);
} else {/* We need to compare an IP address */
switch (pFrom->sa_family) {
case AF_INET:
if (AF_INET == pAllow->addr.NetAddr->sa_family)
return(( SIN(pFrom)->sin_addr.s_addr & htonl(0xffffffff << (32 - bits)) )
== SIN(pAllow->addr.NetAddr)->sin_addr.s_addr);
else
return 0;
break;
case AF_INET6:
switch (pAllow->addr.NetAddr->sa_family) {
case AF_INET6: {
struct in6_addr ip, net;
register uint8_t i;
memcpy (&ip, &(SIN6(pFrom))->sin6_addr, sizeof (struct in6_addr));
memcpy (&net, &(SIN6(pAllow->addr.NetAddr))->sin6_addr, sizeof (struct in6_addr));
i = bits/32;
if (bits % 32)
ip.s6_addr32[i++] &= htonl(0xffffffff << (32 - (bits % 32)));
for (; i < (sizeof ip.s6_addr32)/4; i++)
ip.s6_addr32[i] = 0;
return (memcmp (ip.s6_addr, net.s6_addr, sizeof ip.s6_addr) == 0 &&
(SIN6(pAllow->addr.NetAddr)->sin6_scope_id != 0 ?
SIN6(pFrom)->sin6_scope_id == SIN6(pAllow->addr.NetAddr)->sin6_scope_id : 1));
}
case AF_INET: {
struct in6_addr *ip6 = &(SIN6(pFrom))->sin6_addr;
struct in_addr *net = &(SIN(pAllow->addr.NetAddr))->sin_addr;
if ((ip6->s6_addr32[3] & (u_int32_t) htonl((0xffffffff << (32 - bits)))) == net->s_addr &&
#if BYTE_ORDER == LITTLE_ENDIAN
(ip6->s6_addr32[2] == (u_int32_t)0xffff0000) &&
#else
(ip6->s6_addr32[2] == (u_int32_t)0x0000ffff) &&
#endif
(ip6->s6_addr32[1] == 0) && (ip6->s6_addr32[0] == 0))
return 1;
else
return 0;
}
default:
/* Unsupported AF */
return 0;
}
default:
/* Unsupported AF */
return 0;
}
}
}
/* check if a sender is allowed. The root of the the allowed sender.
* list must be proveded by the caller. As such, this function can be
* used to check both UDP and TCP allowed sender lists.
* returns 1, if the sender is allowed, 0 otherwise.
* rgerhards, 2005-09-26
*/
int isAllowedSender(struct AllowedSenders *pAllowRoot, struct sockaddr *pFrom, const char *pszFromHost)
{
struct AllowedSenders *pAllow;
assert(pFrom != NULL);
if(pAllowRoot == NULL)
return 1; /* checking disabled, everything is valid! */
/* now we loop through the list of allowed senders. As soon as
* we find a match, we return back (indicating allowed). We loop
* until we are out of allowed senders. If so, we fall through the
* loop and the function's terminal return statement will indicate
* that the sender is disallowed.
*/
for(pAllow = pAllowRoot ; pAllow != NULL ; pAllow = pAllow->pNext) {
if (MaskCmp (&(pAllow->allowedSender), pAllow->SignificantBits, pFrom, pszFromHost))
return 1;
}
return 0;
}
#endif /* #ifdef SYSLOG_INET */
/* code to free all sockets within a socket table.
* A socket table is a descriptor table where the zero
* element has the count of elements. This is used for
* listening sockets. The socket table itself is also
* freed.
* A POINTER to this structure must be provided, thus
* double indirection!
* rgerhards, 2007-06-28
*/
void freeAllSockets(int **socks)
{
assert(socks != NULL);
assert(*socks != NULL);
while(**socks) {
dbgprintf("Closing socket %d.\n", (*socks)[**socks]);
close((*socks)[**socks]);
(**socks)--;
}
free(*socks);
socks = NULL;
}
/*******************************************************************
* BEGIN CODE-LIBLOGGING *
*******************************************************************
* Code in this section is borrowed from liblogging. This is an
* interim solution. Once liblogging is fully integrated, this is
* to be removed (see http://www.monitorware.com/liblogging for
* more details. 2004-11-16 rgerhards
*
* Please note that the orginal liblogging code is modified so that
* it fits into the context of the current version of syslogd.c.
*
* DO NOT PUT ANY OTHER CODE IN THIS BEGIN ... END BLOCK!!!!
*/
/**
* Parse a 32 bit integer number from a string.
*
* \param ppsz Pointer to the Pointer to the string being parsed. It
* must be positioned at the first digit. Will be updated
* so that on return it points to the first character AFTER
* the integer parsed.
* \retval The number parsed.
*/
static int srSLMGParseInt32(char** ppsz)
{
int i;
i = 0;
while(isdigit((int) **ppsz))
{
i = i * 10 + **ppsz - '0';
++(*ppsz);
}
return i;
}
/**
* Parse a TIMESTAMP-3339.
* updates the parse pointer position.
*/
static int srSLMGParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS)
{
char *pszTS = *ppszTS;
assert(pTime != NULL);
assert(ppszTS != NULL);
assert(pszTS != NULL);
pTime->year = srSLMGParseInt32(&pszTS);
/* We take the liberty to accept slightly malformed timestamps e.g. in
* the format of 2003-9-1T1:0:0. This doesn't hurt on receiving. Of course,
* with the current state of affairs, we would never run into this code
* here because at postion 11, there is no "T" in such cases ;)
*/
if(*pszTS++ != '-')
return FALSE;
pTime->month = srSLMGParseInt32(&pszTS);
if(pTime->month < 1 || pTime->month > 12)
return FALSE;
if(*pszTS++ != '-')
return FALSE;
pTime->day = srSLMGParseInt32(&pszTS);
if(pTime->day < 1 || pTime->day > 31)
return FALSE;
if(*pszTS++ != 'T')
return FALSE;
pTime->hour = srSLMGParseInt32(&pszTS);
if(pTime->hour < 0 || pTime->hour > 23)
return FALSE;
if(*pszTS++ != ':')
return FALSE;
pTime->minute = srSLMGParseInt32(&pszTS);
if(pTime->minute < 0 || pTime->minute > 59)
return FALSE;
if(*pszTS++ != ':')
return FALSE;
pTime->second = srSLMGParseInt32(&pszTS);
if(pTime->second < 0 || pTime->second > 60)
return FALSE;
/* Now let's see if we have secfrac */
if(*pszTS == '.')
{
char *pszStart = ++pszTS;
pTime->secfrac = srSLMGParseInt32(&pszTS);
pTime->secfracPrecision = (int) (pszTS - pszStart);
}
else
{
pTime->secfracPrecision = 0;
pTime->secfrac = 0;
}
/* check the timezone */
if(*pszTS == 'Z')
{
pszTS++; /* eat Z */
pTime->OffsetMode = 'Z';
pTime->OffsetHour = 0;
pTime->OffsetMinute = 0;
}
else if((*pszTS == '+') || (*pszTS == '-'))
{
pTime->OffsetMode = *pszTS;
pszTS++;
pTime->OffsetHour = srSLMGParseInt32(&pszTS);
if(pTime->OffsetHour < 0 || pTime->OffsetHour > 23)
return FALSE;
if(*pszTS++ != ':')
return FALSE;
pTime->OffsetMinute = srSLMGParseInt32(&pszTS);
if(pTime->OffsetMinute < 0 || pTime->OffsetMinute > 59)
return FALSE;
}
else
/* there MUST be TZ information */
return FALSE;
/* OK, we actually have a 3339 timestamp, so let's indicated this */
if(*pszTS == ' ')
++pszTS;
else
return FALSE;
/* update parse pointer */
*ppszTS = pszTS;
return TRUE;
}
/**
* Parse a TIMESTAMP-3164.
* Returns TRUE on parse OK, FALSE on parse error.
*/
static int srSLMGParseTIMESTAMP3164(struct syslogTime *pTime, char* pszTS)
{
assert(pTime != NULL);
assert(pszTS != NULL);
getCurrTime(pTime); /* obtain the current year and UTC offsets! */
/* If we look at the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec),
* we may see the following character sequences occur:
*
* J(an/u(n/l)), Feb, Ma(r/y), A(pr/ug), Sep, Oct, Nov, Dec
*
* We will use this for parsing, as it probably is the
* fastest way to parse it.
*
* 2005-07-18, well sometimes it pays to be a bit more verbose, even in C...
* Fixed a bug that lead to invalid detection of the data. The issue was that
* we had an if(++pszTS == 'x') inside of some of the consturcts below. However,
* there were also some elseifs (doing the same ++), which than obviously did not
* check the orginal character but the next one. Now removed the ++ and put it
* into the statements below. Was a really nasty bug... I didn't detect it before
* june, when it first manifested. This also lead to invalid parsing of the rest
* of the message, as the time stamp was not detected to be correct. - rgerhards
*/
switch(*pszTS++)
{
case 'J':
if(*pszTS == 'a') {
++pszTS;
if(*pszTS == 'n') {
++pszTS;
pTime->month = 1;
} else
return FALSE;
} else if(*pszTS == 'u') {
++pszTS;
if(*pszTS == 'n') {
++pszTS;
pTime->month = 6;
} else if(*pszTS == 'l') {
++pszTS;
pTime->month = 7;
} else
return FALSE;
} else
return FALSE;
break;
case 'F':
if(*pszTS == 'e') {
++pszTS;
if(*pszTS == 'b') {
++pszTS;
pTime->month = 2;
} else
return FALSE;
} else
return FALSE;
break;
case 'M':
if(*pszTS == 'a') {
++pszTS;
if(*pszTS == 'r') {
++pszTS;
pTime->month = 3;
} else if(*pszTS == 'y') {
++pszTS;
pTime->month = 5;
} else
return FALSE;
} else
return FALSE;
break;
case 'A':
if(*pszTS == 'p') {
++pszTS;
if(*pszTS == 'r') {
++pszTS;
pTime->month = 4;
} else
return FALSE;
} else if(*pszTS == 'u') {
++pszTS;
if(*pszTS == 'g') {
++pszTS;
pTime->month = 8;
} else
return FALSE;
} else
return FALSE;
break;
case 'S':
if(*pszTS == 'e') {
++pszTS;
if(*pszTS == 'p') {
++pszTS;
pTime->month = 9;
} else
return FALSE;
} else
return FALSE;
break;
case 'O':
if(*pszTS == 'c') {
++pszTS;
if(*pszTS == 't') {
++pszTS;
pTime->month = 10;
} else
return FALSE;
} else
return FALSE;
break;
case 'N':
if(*pszTS == 'o') {
++pszTS;
if(*pszTS == 'v') {
++pszTS;
pTime->month = 11;
} else
return FALSE;
} else
return FALSE;
break;
case 'D':
if(*pszTS == 'e') {
++pszTS;
if(*pszTS == 'c') {
++pszTS;
pTime->month = 12;
} else
return FALSE;
} else
return FALSE;
break;
default:
return FALSE;
}
/* done month */
if(*pszTS++ != ' ')
return FALSE;
/* we accept a slightly malformed timestamp when receiving. This is
* we accept one-digit days
*/
if(*pszTS == ' ')
++pszTS;
pTime->day = srSLMGParseInt32(&pszTS);
if(pTime->day < 1 || pTime->day > 31)
return FALSE;
if(*pszTS++ != ' ')
return FALSE;
pTime->hour = srSLMGParseInt32(&pszTS);
if(pTime->hour < 0 || pTime->hour > 23)
return FALSE;
if(*pszTS++ != ':')
return FALSE;
pTime->minute = srSLMGParseInt32(&pszTS);
if(pTime->minute < 0 || pTime->minute > 59)
return FALSE;
if(*pszTS++ != ':')
return FALSE;
pTime->second = srSLMGParseInt32(&pszTS);
if(pTime->second < 0 || pTime->second > 60)
return FALSE;
if(*pszTS++ != ':')
/* OK, we actually have a 3164 timestamp, so let's indicate this
* and fill the rest of the properties. */
pTime->timeType = 1;
pTime->secfracPrecision = 0;
pTime->secfrac = 0;
return TRUE;
}
/*******************************************************************
* END CODE-LIBLOGGING *
*******************************************************************/
/**
* Format a syslogTimestamp into format required by MySQL.
* We are using the 14 digits format. For example 20041111122600
* is interpreted as '2004-11-11 12:26:00'.
* The caller must provide the timestamp as well as a character
* buffer that will receive the resulting string. The function
* returns the size of the timestamp written in bytes (without
* the string terminator). If 0 is returend, an error occured.
*/
int formatTimestampToMySQL(struct syslogTime *ts, char* pDst, size_t iLenDst)
{
/* currently we do not consider localtime/utc. This may later be
* added. If so, I recommend using a property replacer option
* and/or a global configuration option. However, we should wait
* on user requests for this feature before doing anything.
* rgerhards, 2007-06-26
*/
assert(ts != NULL);
assert(pDst != NULL);
if (iLenDst < 15) /* we need at least 14 bytes
14 digits for timestamp + '\n' */
return(0);
return(snprintf(pDst, iLenDst, "%4.4d%2.2d%2.2d%2.2d%2.2d%2.2d",
ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second));
}
int formatTimestampToPgSQL(struct syslogTime *ts, char *pDst, size_t iLenDst)
{
/* see note in formatTimestampToMySQL, applies here as well */
assert(ts != NULL);
assert(pDst != NULL);
if (iLenDst < 21) /* we need 20 bytes + '\n' */
return(0);
return(snprintf(pDst, iLenDst, "%4.4d-%2.2d-%2.2d %2.2d:%2.2d:%2.2d",
ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second));
}
/**
* Format a syslogTimestamp to a RFC3339 timestamp string (as
* specified in syslog-protocol).
* The caller must provide the timestamp as well as a character
* buffer that will receive the resulting string. The function
* returns the size of the timestamp written in bytes (without
* the string terminator). If 0 is returend, an error occured.
*/
int formatTimestamp3339(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
int iRet;
char szTZ[7]; /* buffer for TZ information */
assert(ts != NULL);
assert(pBuf != NULL);
if(iLenBuf < 20)
return(0); /* we NEED at least 20 bytes */
/* do TZ information first, this is easier to take care of "Z" zone in rfc3339 */
if(ts->OffsetMode == 'Z') {
szTZ[0] = 'Z';
szTZ[1] = '\0';
} else {
snprintf(szTZ, sizeof(szTZ) / sizeof(char), "%c%2.2d:%2.2d",
ts->OffsetMode, ts->OffsetHour, ts->OffsetMinute);
}
if(ts->secfracPrecision > 0)
{ /* we now need to include fractional seconds. While doing so, we must look at
* the precision specified. For example, if we have millisec precision (3 digits), a
* secFrac value of 12 is not equivalent to ".12" but ".012". Obviously, this
* is a huge difference ;). To avoid this, we first create a format string with
* the specific precision and *then* use that format string to do the actual
* formating (mmmmhhh... kind of self-modifying code... ;)).
*/
char szFmtStr[64];
/* be careful: there is ONE actual %d in the format string below ;) */
snprintf(szFmtStr, sizeof(szFmtStr),
"%%04d-%%02d-%%02dT%%02d:%%02d:%%02d.%%0%dd%%s",
ts->secfracPrecision);
iRet = snprintf(pBuf, iLenBuf, szFmtStr, ts->year, ts->month, ts->day,
ts->hour, ts->minute, ts->second, ts->secfrac, szTZ);
}
else
iRet = snprintf(pBuf, iLenBuf,
"%4.4d-%2.2d-%2.2dT%2.2d:%2.2d:%2.2d%s",
ts->year, ts->month, ts->day,
ts->hour, ts->minute, ts->second, szTZ);
return(iRet);
}
/**
* Format a syslogTimestamp to a RFC3164 timestamp sring.
* The caller must provide the timestamp as well as a character
* buffer that will receive the resulting string. The function
* returns the size of the timestamp written in bytes (without
* the string termnator). If 0 is returend, an error occured.
*/
int formatTimestamp3164(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
static char* monthNames[13] = {"ERR", "Jan", "Feb", "Mar",
"Apr", "May", "Jun", "Jul",
"Aug", "Sep", "Oct", "Nov", "Dec"};
assert(ts != NULL);
assert(pBuf != NULL);
if(iLenBuf < 16)
return(0); /* we NEED 16 bytes */
return(snprintf(pBuf, iLenBuf, "%s %2d %2.2d:%2.2d:%2.2d",
monthNames[ts->month], ts->day, ts->hour,
ts->minute, ts->second
));
}
/**
* Format a syslogTimestamp to a text format.
* The caller must provide the timestamp as well as a character
* buffer that will receive the resulting string. The function
* returns the size of the timestamp written in bytes (without
* the string termnator). If 0 is returend, an error occured.
*/
#if 0 /* This method is currently not called, be we like to preserve it */
static int formatTimestamp(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
assert(ts != NULL);
assert(pBuf != NULL);
if(ts->timeType == 1) {
return(formatTimestamp3164(ts, pBuf, iLenBuf));
}
if(ts->timeType == 2) {
return(formatTimestamp3339(ts, pBuf, iLenBuf));
}
return(0);
}
#endif
/**
* Get the current date/time in the best resolution the operating
* system has to offer (well, actually at most down to the milli-
* second level.
*
* The date and time is returned in separate fields as this is
* most portable and removes the need for additional structures
* (but I have to admit it is somewhat "bulky";)).
*
* Obviously, all caller-provided pointers must not be NULL...
*/
void getCurrTime(struct syslogTime *t)
{
struct timeval tp;
struct tm *tm;
struct tm tmBuf;
long lBias;
assert(t != NULL);
gettimeofday(&tp, NULL);
tm = localtime_r((time_t*) &(tp.tv_sec), &tmBuf);
t->year = tm->tm_year + 1900;
t->month = tm->tm_mon + 1;
t->day = tm->tm_mday;
t->hour = tm->tm_hour;
t->minute = tm->tm_min;
t->second = tm->tm_sec;
t->secfrac = tp.tv_usec;
t->secfracPrecision = 6;
# if __sun
/* Solaris uses a different method of exporting the time zone.
* It is UTC - localtime, which is the opposite sign of mins east of GMT.
*/
lBias = -(daylight ? altzone : timezone);
# else
lBias = tm->tm_gmtoff;
# endif
if(lBias < 0)
{
t->OffsetMode = '-';
lBias *= -1;
}
else
t->OffsetMode = '+';
t->OffsetHour = lBias / 3600;
t->OffsetMinute = lBias % 3600;
}
/* rgerhards 2004-11-09: end of helper routines. On to the
* "real" code ;)
*/
static int usage(void)
{
fprintf(stderr, "usage: rsyslogd [-46AdhqQvw] [-cversion] [-lhostlist] [-mmarkinterval] [-n] [-p path]\n" \
" [-s domainlist] [-r[port]] [-tport[,max-sessions]] [-gport[,max-sessions]] [-f conffile] [-i pidfile] [-x]\n\n");
fprintf(stderr, "The following options are deprecated and are provided\n"
"for compatibility reasons only:\n"
"-mmarkinterval\n\n"
"For further information see http://www.rsyslog.com/doc\n"
);
exit(1); /* "good" exit - done to terminate usage() */
}
#ifdef SYSLOG_INET
/* closes the UDP listen sockets (if they exist) and frees
* all dynamically assigned memory.
*/
static void closeUDPListenSockets()
{
register int i;
if(finet != NULL) {
for (i = 0; i < *finet; i++)
close(finet[i+1]);
free(finet);
finet = NULL;
}
}
/* creates the UDP listen sockets
*/
static int *create_udp_socket()
{
struct addrinfo hints, *res, *r;
int error, maxs, *s, *socks, on = 1;
int sockflags;
memset(&hints, 0, sizeof(hints));
hints.ai_flags = AI_PASSIVE | AI_NUMERICSERV;
hints.ai_family = family;
hints.ai_socktype = SOCK_DGRAM;
error = getaddrinfo(NULL, LogPort, &hints, &res);
if(error) {
logerror((char*) gai_strerror(error));
logerror("UDP message reception disabled due to error logged in last message.\n");
return NULL;
}
/* Count max number of sockets we may open */
for (maxs = 0, r = res; r != NULL ; r = r->ai_next, maxs++)
/* EMPTY */;
socks = malloc((maxs+1) * sizeof(int));
if (socks == NULL) {
logerror("couldn't allocate memory for UDP sockets, suspending UDP message reception");
freeaddrinfo(res);
return NULL;
}
*socks = 0; /* num of sockets counter at start of array */
s = socks + 1;
for (r = res; r != NULL ; r = r->ai_next) {
*s = socket(r->ai_family, r->ai_socktype, r->ai_protocol);
if (*s < 0) {
if(!(r->ai_family == PF_INET6 && errno == EAFNOSUPPORT))
logerror("create_udp_socket(), socket");
/* it is debatable if PF_INET with EAFNOSUPPORT should
* also be ignored...
*/
continue;
}
# ifdef IPV6_V6ONLY
if (r->ai_family == AF_INET6) {
int ion = 1;
if (setsockopt(*s, IPPROTO_IPV6, IPV6_V6ONLY,
(char *)&ion, sizeof (ion)) < 0) {
logerror("setsockopt");
close(*s);
*s = -1;
continue;
}
}
# endif
/* if we have an error, we "just" suspend that socket. Eventually
* other sockets will work. At the end of this function, we check
* if we managed to open at least one socket. If not, we'll write
* a "inet suspended" message and declare failure. Else we use
* what we could obtain.
* rgerhards, 2007-06-22
*/
if (setsockopt(*s, SOL_SOCKET, SO_REUSEADDR,
(char *) &on, sizeof(on)) < 0 ) {
logerror("setsockopt(REUSEADDR)");
close(*s);
*s = -1;
continue;
}
/* We need to enable BSD compatibility. Otherwise an attacker
* could flood our log files by sending us tons of ICMP errors.
*/
#ifndef BSD
if (should_use_so_bsdcompat()) {
if (setsockopt(*s, SOL_SOCKET, SO_BSDCOMPAT,
(char *) &on, sizeof(on)) < 0) {
logerror("setsockopt(BSDCOMPAT)");
close(*s);
*s = -1;
continue;
}
}
#endif
/* We must not block on the network socket, in case a packet
* gets lost between select and recv, otherwise the process
* will stall until the timeout, and other processes trying to
* log will also stall.
* Patch vom Colin Phipps <cph@cph.demon.co.uk> to the original
* sysklogd source. Applied to rsyslogd on 2005-10-19.
*/
if ((sockflags = fcntl(*s, F_GETFL)) != -1) {
sockflags |= O_NONBLOCK;
/* SETFL could fail too, so get it caught by the subsequent
* error check.
*/
sockflags = fcntl(*s, F_SETFL, sockflags);
}
if (sockflags == -1) {
logerror("fcntl(O_NONBLOCK)");
close(*s);
*s = -1;
continue;
}
/* rgerhards, 2007-06-22: if we run on a kernel that does not support
* the IPV6_V6ONLY socket option, we need to use a work-around. On such
* systems the IPv6 socket does also accept IPv4 sockets. So an IPv4
* socket can not listen on the same port as an IPv6 socket. The only
* workaround is to ignore the "socket in use" error. This is what we
* do if we have to.
*/
if( (bind(*s, r->ai_addr, r->ai_addrlen) < 0)
# ifndef IPV6_V6ONLY
&& (errno != EADDRINUSE)
# endif
) {
logerror("bind");
close(*s);
*s = -1;
continue;
}
(*socks)++;
s++;
}
if(res != NULL)
freeaddrinfo(res);
if(Debug && *socks != maxs)
dbgprintf("We could initialize %d UDP listen sockets out of %d we received "
"- this may or may not be an error indication.\n", *socks, maxs);
if(*socks == 0) {
logerror("No UDP listen socket could successfully be initialized, "
"message reception via UDP disabled.\n");
/* we do NOT need to free any sockets, because there were none... */
free(socks);
return(NULL);
}
return(socks);
}
#endif
/* function to destruct a selector_t object
* rgerhards, 2007-08-01
*/
static rsRetVal selectorDestruct(void *pVal)
{
selector_t *pThis = (selector_t *) pVal;
assert(pThis != NULL);
if(pThis->pCSHostnameComp != NULL)
rsCStrDestruct(pThis->pCSHostnameComp);
if(pThis->pCSProgNameComp != NULL)
rsCStrDestruct(pThis->pCSProgNameComp);
if(pThis->f_filter_type == FILTER_PROP) {
if(pThis->f_filterData.prop.pCSPropName != NULL)
rsCStrDestruct(pThis->f_filterData.prop.pCSPropName);
if(pThis->f_filterData.prop.pCSCompValue != NULL)
rsCStrDestruct(pThis->f_filterData.prop.pCSCompValue);
}
llDestroy(&pThis->llActList);
free(pThis);
return RS_RET_OK;
}
/* function to construct a selector_t object
* rgerhards, 2007-08-01
*/
static rsRetVal selectorConstruct(selector_t **ppThis)
{
DEFiRet;
selector_t *pThis;
assert(ppThis != NULL);
if((pThis = (selector_t*) calloc(1, sizeof(selector_t))) == NULL) {
glblHadMemShortage = 1;
ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY);
}
CHKiRet(llInit(&pThis->llActList, actionDestruct, NULL, NULL));
finalize_it:
if(iRet != RS_RET_OK) {
if(pThis != NULL) {
selectorDestruct(pThis);
}
}
*ppThis = pThis;
return iRet;
}
/* rgerhards, 2005-10-24: crunch_list is called only during option processing. So
* it is never called once rsyslogd is running (not even when HUPed). This code
* contains some exits, but they are considered safe because they only happen
* during startup. Anyhow, when we review the code here, we might want to
* reconsider the exit()s.
*/
static char **crunch_list(char *list)
{
int count, i;
char *p, *q;
char **result = NULL;
p = list;
/* strip off trailing delimiters */
while (p[strlen(p)-1] == LIST_DELIMITER) {
count--;
p[strlen(p)-1] = '\0';
}
/* cut off leading delimiters */
while (p[0] == LIST_DELIMITER) {
count--;
p++;
}
/* count delimiters to calculate elements */
for (count=i=0; p[i]; i++)
if (p[i] == LIST_DELIMITER) count++;
if ((result = (char **)malloc(sizeof(char *) * (count+2))) == NULL) {
printf ("Sorry, can't get enough memory, exiting.\n");
exit(0); /* safe exit, because only called during startup */
}
/*
* We now can assume that the first and last
* characters are different from any delimiters,
* so we don't have to care about this.
*/
count = 0;
while ((q=strchr(p, LIST_DELIMITER))) {
result[count] = (char *) malloc((q - p + 1) * sizeof(char));
if (result[count] == NULL) {
printf ("Sorry, can't get enough memory, exiting.\n");
exit(0); /* safe exit, because only called during startup */
}
strncpy(result[count], p, q - p);
result[count][q - p] = '\0';
p = q; p++;
count++;
}
if ((result[count] = \
(char *)malloc(sizeof(char) * strlen(p) + 1)) == NULL) {
printf ("Sorry, can't get enough memory, exiting.\n");
exit(0); /* safe exit, because only called during startup */
}
strcpy(result[count],p);
result[++count] = NULL;
#if 0
count=0;
while (result[count])
dbgprintf("#%d: %s\n", count, StripDomains[count++]);
#endif
return result;
}
void untty(void)
#ifdef HAVE_SETSID
{
if ( !Debug ) {
setsid();
}
return;
}
#else
{
int i;
if ( !Debug ) {
i = open(_PATH_TTY, O_RDWR);
if (i >= 0) {
(void) ioctl(i, (int) TIOCNOTTY, (char *)0);
(void) close(i);
}
}
}
#endif
/* rgerhards, 2006-11-30: I have greatly changed this function. Formerly,
* it tried to reassemble multi-part messages, which is a legacy stock
* sysklogd concept. In essence, that was that messages not ending with
* \0 were glued together. As far as I can see, this is a sysklogd
* specific feature and, from looking at the code, seems to be used
* pretty seldom (if at all). I remove this now, not the least because it is totally
* incompatible with upcoming IETF syslog standards. If you experience
* strange behaviour with messages beeing split across multiple lines,
* this function here might be the place to look at.
*
* Some previous history worth noting:
* I added the "iSource" parameter. This is needed to distinguish between
* messages that have a hostname in them (received from the internet) and
* those that do not have (most prominently /dev/log). rgerhards 2004-11-16
* And now I removed the "iSource" parameter and changed it to be "bParseHost",
* because all that it actually controls is whether the host is parsed or not.
* For rfc3195 support, we needed to modify the algo for host parsing, so we can
* no longer rely just on the source (rfc3195d forwarded messages arrive via
* unix domain sockets but contain the hostname). rgerhards, 2005-10-06
*/
void printchopped(char *hname, char *msg, int len, int fd, int bParseHost)
{
register int iMsg;
char *pMsg;
char *pData;
char *pEnd;
char tmpline[MAXLINE + 1];
# ifdef USE_NETZIP
char deflateBuf[MAXLINE + 1];
uLongf iLenDefBuf;
# endif
assert(hname != NULL);
assert(msg != NULL);
assert(len >= 0);
dbgprintf("Message length: %d, File descriptor: %d.\n", len, fd);
/* we first check if we have a NUL character at the very end of the
* message. This seems to be a frequent problem with a number of senders.
* So I have now decided to drop these NULs. However, if they are intentional,
* that may cause us some problems, e.g. with syslog-sign. On the other hand,
* current code always has problems with intentional NULs (as it needs to escape
* them to prevent problems with the C string libraries), so that does not
* really matter. Just to be on the save side, we'll log destruction of such
* NULs in the debug log.
* rgerhards, 2007-09-14
*/
if(*(msg + len - 1) == '\0') {
dbgprintf("dropped NUL at very end of message\n");
len--;
}
/* then we check if we need to drop trailing LFs, which often make
* their way into syslog messages unintentionally. In order to remain
* compatible to recent IETF developments, we allow the user to
* turn on/off this handling. rgerhards, 2007-07-23
*/
if(bDropTrailingLF && *(msg + len - 1) == '\n') {
dbgprintf("dropped LF at very end of message (DropTrailingLF is set)\n");
len--;
}
iMsg = 0; /* initialize receiving buffer index */
pMsg = tmpline; /* set receiving buffer pointer */
pData = msg; /* set source buffer pointer */
pEnd = msg + len; /* this is one off, which is intensional */
# ifdef USE_NETZIP
/* we first need to check if we have a compressed record. If so,
* we must decompress it.
*/
if(len > 0 && *msg == 'z') { /* compressed data present? (do NOT change order if conditions!) */
/* we have compressed data, so let's deflate it. We support a maximum
* message size of MAXLINE. If it is larger, an error message is logged
* and the message is dropped. We do NOT try to decompress larger messages
* as such might be used for denial of service. It might happen to later
* builds that such functionality be added as an optional, operator-configurable
* feature.
*/
int ret;
iLenDefBuf = MAXLINE;
ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) msg+1, len-1);
dbgprintf("Compressed message uncompressed with status %d, length: new %d, old %d.\n",
ret, iLenDefBuf, len-1);
/* Now check if the uncompression worked. If not, there is not much we can do. In
* that case, we log an error message but ignore the message itself. Storing the
* compressed text is dangerous, as it contains control characters. So we do
* not do this. If someone would like to have a copy, this code here could be
* modified to do a hex-dump of the buffer in question. We do not include
* this functionality right now.
* rgerhards, 2006-12-07
*/
if(ret != Z_OK) {
logerrorInt("Uncompression of a message failed with return code %d "
"- enable debug logging if you need further information. "
"Message ignored.", ret);
return; /* unconditional exit, nothing left to do... */
}
pData = deflateBuf;
pEnd = deflateBuf + iLenDefBuf;
}
# else /* ifdef USE_NETZIP */
/* in this case, we still need to check if the message is compressed. If so, we must
* tell the user we can not accept it.
*/
if(len > 0 && *msg == 'z') {
logerror("Received a compressed message, but rsyslogd does not have compression "
"support enabled. The message will be ignored.");
return;
}
# endif /* ifdef USE_NETZIP */
while(pData < pEnd) {
if(iMsg >= MAXLINE) {
/* emergency, we now need to flush, no matter if
* we are at end of message or not...
*/
if(iMsg == MAXLINE) {
*(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */
printline(hname, tmpline, bParseHost);
} else {
/* This case in theory never can happen. If it happens, we have
* a logic error. I am checking for it, because if I would not,
* we would address memory invalidly with the code above. I
* do not care much about this case, just a debug log entry
* (I couldn't do any more smart things anyway...).
* rgerhards, 2007-9-20
*/
dbgprintf("internal error: iMsg > MAXLINE in printchopped()\n");
}
return; /* in this case, we are done... nothing left we can do */
}
if(*pData == '\0') { /* guard against \0 characters... */
/* changed to the sequence (somewhat) proposed in
* draft-ietf-syslog-protocol-19. rgerhards, 2006-11-30
*/
if(iMsg + 3 < MAXLINE) { /* do we have space? */
*(pMsg + iMsg++) = cCCEscapeChar;
*(pMsg + iMsg++) = '0';
*(pMsg + iMsg++) = '0';
*(pMsg + iMsg++) = '0';
} /* if we do not have space, we simply ignore the '\0'... */
/* log an error? Very questionable... rgerhards, 2006-11-30 */
/* decided: we do not log an error, it won't help... rger, 2007-06-21 */
++pData;
} else if(bEscapeCCOnRcv && iscntrl((int) *pData)) {
/* we are configured to escape control characters. Please note
* that this most probably break non-western character sets like
* Japanese, Korean or Chinese. rgerhards, 2007-07-17
* Note: sysklogd logs octal values only for DEL and CCs above 127.
* For others, it logs ^n where n is the control char converted to an
* alphabet character. We like consistency and thus escape it to octal
* in all cases. If someone complains, we may change the mode. At least
* we known now what's going on.
* rgerhards, 2007-07-17
*/
if(iMsg + 3 < MAXLINE) { /* do we have space? */
*(pMsg + iMsg++) = cCCEscapeChar;
*(pMsg + iMsg++) = '0' + ((*pData & 0300) >> 6);
*(pMsg + iMsg++) = '0' + ((*pData & 0070) >> 3);
*(pMsg + iMsg++) = '0' + ((*pData & 0007));
} /* again, if we do not have space, we ignore the char - see comment at '\0' */
++pData;
} else {
*(pMsg + iMsg++) = *pData++;
}
}
*(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */
/* typically, we should end up here! */
printline(hname, tmpline, bParseHost);
return;
}
/* Take a raw input line, decode the message, and print the message
* on the appropriate log files.
* rgerhards 2004-11-08: Please note
* that this function does only a partial decoding. At best, it splits
* the PRI part. No further decode happens. The rest is done in
* logmsg().
* Added the iSource parameter so that we know if we have to parse
* HOSTNAME or not. rgerhards 2004-11-16.
* changed parameter iSource to bParseHost. For details, see comment in
* printchopped(). rgerhards 2005-10-06
*/
void printline(char *hname, char *msg, int bParseHost)
{
register char *p;
int pri;
msg_t *pMsg;
/* Now it is time to create the message object (rgerhards)
*/
if((pMsg = MsgConstruct()) == NULL){
/* rgerhards, 2007-06-21: if we can not get memory, we discard this
* message but continue to run (in the hope that things improve)
*/
glblHadMemShortage = 1;
dbgprintf("Memory shortage in printline(): Could not construct Msg object.\n");
return;
}
MsgSetRawMsg(pMsg, msg);
pMsg->bParseHOSTNAME = bParseHost;
/* test for special codes */
pri = DEFUPRI;
p = msg;
if (*p == '<') {
pri = 0;
while (isdigit((int) *++p))
{
pri = 10 * pri + (*p - '0');
}
if (*p == '>')
++p;
}
if (pri &~ (LOG_FACMASK|LOG_PRIMASK))
pri = DEFUPRI;
pMsg->iFacility = LOG_FAC(pri);
pMsg->iSeverity = LOG_PRI(pri);
/* Now we look at the HOSTNAME. That is a bit complicated...
* If we have a locally received message, it does NOT
* contain any hostname information in the message itself.
* As such, the HOSTNAME is the same as the system that
* the message was received from (that, for obvious reasons,
* being the local host). rgerhards 2004-11-16
*/
if(bParseHost == 0)
MsgSetHOSTNAME(pMsg, hname);
MsgSetRcvFrom(pMsg, hname);
/* rgerhards 2004-11-19: well, well... we've now seen that we
* have the "hostname problem" also with the traditional Unix
* message. As we like to emulate it, we need to add the hostname
* to it.
*/
if(MsgSetUxTradMsg(pMsg, p) != 0) return;
logmsg(pri, pMsg, SYNC_FILE);
return;
}
/* rgerhards 2004-11-09: the following is a function that can be used
* to log a message orginating from the syslogd itself. In sysklogd code,
* this is done by simply calling logmsg(). However, logmsg() is changed in
* rsyslog so that it takes a msg "object". So it can no longer be called
* directly. This method here solves the need. It provides an interface that
* allows to construct a locally-generated message. Please note that this
* function here probably is only an interim solution and that we need to
* think on the best way to do this.
*/
void
logmsgInternal(int pri, char *msg, int flags)
{
msg_t *pMsg;
if((pMsg = MsgConstruct()) == NULL){
/* rgerhards 2004-11-09: calling panic might not be the
* brightest idea - however, it is the best I currently have
* (think a bit more about this).
* rgehards, 2007-06-21: I have now thought a bit more about
* it. If we are so low on memory, there is few we can do. calling
* panic so far only write a debug line - this is seomthing we keep.
* Other than that, however, we ignore the error and hope that
* memory shortage will be resolved while we continue to run. In any
* case, there is no valid point in aborting the syslogd for this
* reason - that would be counter-productive. So we ignore the
* to be logged message.
*/
glblHadMemShortage = 1;
dbgprintf("Memory shortage in logmsgInternal: could not construct Msg object.\n");
return;
}
MsgSetUxTradMsg(pMsg, msg);
MsgSetRawMsg(pMsg, msg);
MsgSetHOSTNAME(pMsg, LocalHostName);
MsgSetTAG(pMsg, "rsyslogd:");
pMsg->iFacility = LOG_FAC(pri);
pMsg->iSeverity = LOG_PRI(pri);
pMsg->bParseHOSTNAME = 0;
getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */
flags |= INTERNAL_MSG;
if(bRunningMultithreaded == 0) { /* not yet in queued mode */
iminternalAddMsg(pri, pMsg, flags);
} else {
/* we have the queue, so we can simply provide the
* message to the queue engine.
*/
logmsg(pri, pMsg, flags);
}
}
/* This functions looks at the given message and checks if it matches the
* provided filter condition. If so, it returns true, else it returns
* false. This is a helper to logmsg() and meant to drive the decision
* process if a message is to be processed or not. As I expect this
* decision code to grow more complex over time AND logmsg() is already
* a very lengthy function, I thought a separate function is more appropriate.
* 2005-09-19 rgerhards
*/
int shouldProcessThisMessage(selector_t *f, msg_t *pMsg)
{
unsigned short pbMustBeFreed;
char *pszPropVal;
int iRet = 0;
assert(f != NULL);
assert(pMsg != NULL);
/* we first have a look at the global, BSD-style block filters (for tag
* and host). Only if they match, we evaluate the actual filter.
* rgerhards, 2005-10-18
*/
if(f->eHostnameCmpMode == HN_NO_COMP) {
/* EMPTY BY INTENSION - we check this value first, because
* it is the one most often used, so this saves us time!
*/
} else if(f->eHostnameCmpMode == HN_COMP_MATCH) {
if(rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) {
/* not equal, so we are already done... */
dbgprintf("hostname filter '+%s' does not match '%s'\n",
rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg));
return 0;
}
} else { /* must be -hostname */
if(!rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) {
/* not equal, so we are already done... */
dbgprintf("hostname filter '-%s' does not match '%s'\n",
rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg));
return 0;
}
}
if(f->pCSProgNameComp != NULL) {
int bInv = 0, bEqv = 0, offset = 0;
if(*(rsCStrGetSzStrNoNULL(f->pCSProgNameComp)) == '-') {
if(*(rsCStrGetSzStrNoNULL(f->pCSProgNameComp) + 1) == '-')
offset = 1;
else {
bInv = 1;
offset = 1;
}
}
if(!rsCStrOffsetSzStrCmp(f->pCSProgNameComp, offset, (uchar*) getProgramName(pMsg), getProgramNameLen(pMsg)))
bEqv = 1;
if((!bEqv && !bInv) || (bEqv && bInv)) {
/* not equal or inverted selection, so we are already done... */
dbgprintf("programname filter '%s' does not match '%s'\n",
rsCStrGetSzStrNoNULL(f->pCSProgNameComp), getProgramName(pMsg));
return 0;
}
}
/* done with the BSD-style block filters */
if(f->f_filter_type == FILTER_PRI) {
/* skip messages that are incorrect priority */
if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || \
((f->f_filterData.f_pmask[pMsg->iFacility] & (1<<pMsg->iSeverity)) == 0) )
iRet = 0;
else
iRet = 1;
} else {
assert(f->f_filter_type == FILTER_PROP); /* assert() just in case... */
pszPropVal = MsgGetProp(pMsg, NULL, f->f_filterData.prop.pCSPropName, &pbMustBeFreed);
/* Now do the compares (short list currently ;)) */
switch(f->f_filterData.prop.operation ) {
case FIOP_CONTAINS:
if(rsCStrLocateInSzStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal) != -1)
iRet = 1;
break;
case FIOP_ISEQUAL:
if(rsCStrSzStrCmp(f->f_filterData.prop.pCSCompValue,
(uchar*) pszPropVal, strlen(pszPropVal)) == 0)
iRet = 1; /* process message! */
break;
case FIOP_STARTSWITH:
if(rsCStrSzStrStartsWithCStr(f->f_filterData.prop.pCSCompValue,
(uchar*) pszPropVal, strlen(pszPropVal)) == 0)
iRet = 1; /* process message! */
break;
case FIOP_REGEX:
if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue,
(unsigned char*) pszPropVal) == 0)
iRet = 1;
break;
default:
/* here, it handles NOP (for performance reasons) */
assert(f->f_filterData.prop.operation == FIOP_NOP);
iRet = 1; /* as good as any other default ;) */
break;
}
/* now check if the value must be negated */
if(f->f_filterData.prop.isNegated)
iRet = (iRet == 1) ? 0 : 1;
if(Debug) {
printf("Filter: check for property '%s' (value '%s') ",
rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSPropName),
pszPropVal);
if(f->f_filterData.prop.isNegated)
printf("NOT ");
printf("%s '%s': %s\n",
getFIOPName(f->f_filterData.prop.operation),
rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSCompValue),
iRet ? "TRUE" : "FALSE");
}
/* cleanup */
if(pbMustBeFreed)
free(pszPropVal);
}
return(iRet);
}
/* doEmergencyLoggin()
* ... does exactly do that. It logs messages when the subsystem has not yet
* been initialized. This almost always happens during initial startup or
* during HUPing. -- rgerhards, 2007-07-25
* rgerhards, 2007-08-03: as of now, this can normally no longer happen. All
* startup messages are now buffered until the system is ready to run. I leave
* this minimal implementation here in in the very remote case that it might
* be needed in the future or due to a program bug. Do *not* excpect this
* code to be called.
*/
static void doEmergencyLogging(msg_t *pMsg)
{
assert(pMsg != NULL);
fprintf(stderr, "rsyslog: %s\n", pMsg->pszMSG);
}
/* call the configured action. Does all necessary housekeeping.
* rgerhards, 2007-08-01
*/
static rsRetVal callAction(msg_t *pMsg, action_t *pAction)
{
DEFiRet;
assert(pMsg != NULL);
assert(pAction != NULL);
/* Make sure nodbody else modifies/uses this action object. Right now, this
* is important because of "message repeated n times" processing, later it will
* become important when we (possibly) have multiple worker threads.
* rgerhards, 2007-12-11
*/
LockObj(pAction);
/* first, we need to check if this is a disabled
* entry. If so, we must not further process it.
* rgerhards 2005-09-26
* In the future, disabled modules may be re-probed from time
* to time. They are in a perfectly legal state, except that the
* doAction method indicated that it wanted to be disabled - but
* we do not consider this is a solution for eternity... So we
* should check from time to time if affairs have improved.
* rgerhards, 2007-07-24
*/
if(pAction->bEnabled == 0) {
ABORT_FINALIZE(RS_RET_OK);
}
if(actionIsSuspended(pAction)) {
CHKiRet(actionTryResume(pAction));
}
/* don't output marks to recently written files */
if ((pMsg->msgFlags & MARK) && (time(NULL) - pAction->f_time) < MarkInterval / 2) {
ABORT_FINALIZE(RS_RET_OK);
}
/* suppress duplicate messages
*/
if ((pAction->f_ReduceRepeated == 1) && pAction->f_pMsg != NULL &&
(pMsg->msgFlags & MARK) == 0 && getMSGLen(pMsg) == getMSGLen(pAction->f_pMsg) &&
!strcmp(getMSG(pMsg), getMSG(pAction->f_pMsg)) &&
!strcmp(getHOSTNAME(pMsg), getHOSTNAME(pAction->f_pMsg)) &&
!strcmp(getPROCID(pMsg), getPROCID(pAction->f_pMsg)) &&
!strcmp(getAPPNAME(pMsg), getAPPNAME(pAction->f_pMsg))) {
pAction->f_prevcount++;
dbgprintf("msg repeated %d times, %ld sec of %d.\n",
pAction->f_prevcount, time(NULL) - pAction->f_time,
repeatinterval[pAction->f_repeatcount]);
/* use current message, so we have the new timestamp (means we need to discard previous one) */
MsgDestruct(pAction->f_pMsg);
pAction->f_pMsg = MsgAddRef(pMsg);
/* If domark would have logged this by now, flush it now (so we don't hold
* isolated messages), but back off so we'll flush less often in the future.
*/
if(time(NULL) > REPEATTIME(pAction)) {
iRet = fprintlog(pAction);
BACKOFF(pAction);
}
} else {
/* new message, save it */
/* first check if we have a previous message stored
* if so, emit and then discard it first
*/
if(pAction->f_pMsg != NULL) {
if(pAction->f_prevcount > 0)
fprintlog(pAction);
/* we do not care about iRet above - I think it's right but if we have
* some troubles, you know where to look at ;) -- rgerhards, 2007-08-01
*/
MsgDestruct(pAction->f_pMsg);
}
pAction->f_pMsg = MsgAddRef(pMsg);
/* call the output driver */
iRet = fprintlog(pAction);
}
finalize_it:
UnlockObj(pAction);
return iRet;
}
/* helper to processMsg(), used to call the configured actions. It is
* executed from within llExecFunc() of the action list.
* rgerhards, 2007-08-02
*/
typedef struct processMsgDoActions_s {
int bPrevWasSuspended; /* was the previous action suspended? */
msg_t *pMsg;
} processMsgDoActions_t;
DEFFUNC_llExecFunc(processMsgDoActions)
{
DEFiRet;
rsRetVal iRetMod; /* return value of module - we do not always pass that back */
action_t *pAction = (action_t*) pData;
processMsgDoActions_t *pDoActData = (processMsgDoActions_t*) pParam;
assert(pAction != NULL);
if((pAction->bExecWhenPrevSusp == 1) && (pDoActData->bPrevWasSuspended == 0)) {
dbgprintf("not calling action because the previous one is not suspended\n");
ABORT_FINALIZE(RS_RET_OK);
}
iRetMod = callAction(pDoActData->pMsg, pAction);
if(iRetMod == RS_RET_DISCARDMSG) {
ABORT_FINALIZE(RS_RET_DISCARDMSG);
} else if(iRetMod == RS_RET_SUSPENDED) {
/* indicate suspension for next module to be called */
pDoActData->bPrevWasSuspended = 1;
} else {
pDoActData->bPrevWasSuspended = 0;
}
finalize_it:
return iRet;
}
/* Process (consume) a received message. Calls the actions configured.
* Can some time later run in its own thread. To aid this, the calling
* parameters should be reduced to just pMsg.
* See comment dated 2005-10-13 in logmsg() on multithreading.
* rgerhards, 2005-10-13
*/
static void processMsg(msg_t *pMsg)
{
selector_t *f;
int bContinue;
processMsgDoActions_t DoActData;
assert(pMsg != NULL);
/* log the message to the particular outputs */
if (!Initialized) {
doEmergencyLogging(pMsg);
return;
}
bContinue = 1;
for (f = Files; f != NULL && bContinue ; f = f->f_next) {
/* This is actually the "filter logic". Looks like we need
* to improve it a little for complex selector line conditions. We
* won't do that for now, but at least we now know where
* to look at.
* 2005-09-09 rgerhards
* ok, we are now ready to move to something more advanced. Because
* of this, I am moving the actual decision code to outside this function.
* 2005-09-19 rgerhards
*/
if(!shouldProcessThisMessage(f, pMsg)) {
continue;
}
/* ok -- from here, we have action-specific code, nothing really selector-specific -- rger 2007-08-01 */
DoActData.pMsg = pMsg;
DoActData.bPrevWasSuspended = 0;
if(llExecFunc(&f->llActList, processMsgDoActions, (void*)&DoActData) == RS_RET_DISCARDMSG)
bContinue = 0;
}
}
/* Start Threading-Related code */
/* shuts down the worker process. The worker will first finish
* with the message queue. Control returns, when done.
* This function is intended to be called during syslogd shutdown
* AND restart (init()!).
* rgerhards, 2005-10-25
*/
static void stopWorker(void)
{
if(bRunningMultithreaded) {
/* we could run single-threaded if there was an error
* during startup. Then, we obviously do not need to
* do anything to stop the worker ;)
*/
dbgprintf("Initiating worker thread shutdown sequence...\n");
/* We are now done with all messages, so we need to wake up the
* worker thread and then wait for it to finish.
*/
bGlblDone = 1;
/* It's actually not "not empty" below but awaking the worker. The worker
* then finds out that it shall terminate and does so.
*/
pthread_cond_signal(pMsgQueue->notEmpty);
pthread_join(thrdWorker, NULL);
bRunningMultithreaded = 0;
dbgprintf("Worker thread terminated.\n");
}
}
/* starts the worker thread. It must be made sure that the queue is
* already existing and the worker is NOT already running.
* rgerhards 2005-10-25
*/
static void startWorker(void)
{
int i;
if(pMsgQueue != NULL) {
bGlblDone = 0; /* we are NOT done (else worker would immediately terminate) */
i = pthread_create(&thrdWorker, NULL, singleWorker, NULL);
dbgprintf("Worker thread started with state %d.\n", i);
bRunningMultithreaded = 1;
} else {
dbgprintf("message queue not existing, remaining single-threaded.\n");
}
}
/* The worker thread (so far, we have dual-threading, so only one
* worker thread. Having more than one worker requires considerable
* additional code review in regard to thread-safety.
*/
static void *
singleWorker()
{
msgQueue *fifo = pMsgQueue;
msg_t *pMsg;
sigset_t sigSet;
assert(fifo != NULL);
sigfillset(&sigSet);
pthread_sigmask(SIG_BLOCK, &sigSet, NULL);
while(!bGlblDone || !fifo->empty) {
pthread_mutex_lock(fifo->mut);
while (fifo->empty && !bGlblDone) {
dbgprintf("singleWorker: queue EMPTY, waiting for next message.\n");
pthread_cond_wait (fifo->notEmpty, fifo->mut);
}
if(!fifo->empty) {
/* dequeue element (still protected from mutex) */
queueDel(fifo, (void*) &pMsg);
assert(pMsg != NULL);
pthread_mutex_unlock(fifo->mut);
pthread_cond_signal (fifo->notFull);
/* do actual processing (the lengthy part, runs in parallel) */
dbgprintf("Lone worker is running...\n");
processMsg(pMsg);
MsgDestruct(pMsg);
/* If you need a delay for testing, here do a */
/* sleep(1); */
} else { /* the mutex must be unlocked in any case (important for termination) */
pthread_mutex_unlock(fifo->mut);
}
if(debugging_on && bGlblDone && !fifo->empty)
dbgprintf("Worker does not yet terminate because it still has messages to process.\n");
}
dbgprintf("Worker thread terminates\n");
pthread_exit(0);
}
/* END threads-related code */
/* This method enqueues a message into the the message buffer. It also
* the worker thread, so that the message will be processed.
* See comment dated 2005-10-13 in logmsg() on multithreading.
* rgerhards, 2005-10-24
*/
static void enqueueMsg(msg_t *pMsg)
{
int iRet;
msgQueue *fifo = pMsgQueue;
struct timespec t;
assert(pMsg != NULL);
if(bRunningMultithreaded == 0) {
/* multi-threading is not yet initialized, happens e.g.
* during startup and restart. rgerhards, 2005-10-25
*/
dbgprintf("enqueueMsg: not yet running on multiple threads\n");
processMsg(pMsg);
} else {
/* "normal" mode, threading initialized */
pthread_mutex_lock(fifo->mut);
while (fifo->full) {
dbgprintf("enqueueMsg: queue FULL.\n");
clock_gettime (CLOCK_REALTIME, &t);
t.tv_sec += 2;
if(pthread_cond_timedwait (fifo->notFull,
fifo->mut, &t) != 0) {
dbgprintf("enqueueMsg: cond timeout, dropping message!\n");
MsgDestruct(pMsg);
goto unlock;
}
}
queueAdd(fifo, pMsg);
unlock:
/* now activate the worker thread */
pthread_mutex_unlock(fifo->mut);
iRet = pthread_cond_signal(fifo->notEmpty);
dbgprintf("EnqueueMsg signaled condition (%d)\n", iRet);
}
}
/* Helper to parseRFCSyslogMsg. This function parses a field up to
* (and including) the SP character after it. The field contents is
* returned in a caller-provided buffer. The parsepointer is advanced
* to after the terminating SP. The caller must ensure that the
* provided buffer is large enough to hold the to be extracted value.
* Returns 0 if everything is fine or 1 if either the field is not
* SP-terminated or any other error occurs.
* rger, 2005-11-24
*/
static int parseRFCField(char **pp2parse, char *pResult)
{
char *p2parse;
int iRet = 0;
assert(pp2parse != NULL);
assert(*pp2parse != NULL);
assert(pResult != NULL);
p2parse = *pp2parse;
/* this is the actual parsing loop */
while(*p2parse && *p2parse != ' ') {
*pResult++ = *p2parse++;
}
if(*p2parse == ' ')
++p2parse; /* eat SP, but only if not at end of string */
else
iRet = 1; /* there MUST be an SP! */
*pResult = '\0';
/* set the new parse pointer */
*pp2parse = p2parse;
return 0;
}
/* Helper to parseRFCSyslogMsg. This function parses the structured
* data field of a message. It does NOT parse inside structured data,
* just gets the field as whole. Parsing the single entities is left
* to other functions. The parsepointer is advanced
* to after the terminating SP. The caller must ensure that the
* provided buffer is large enough to hold the to be extracted value.
* Returns 0 if everything is fine or 1 if either the field is not
* SP-terminated or any other error occurs.
* rger, 2005-11-24
*/
static int parseRFCStructuredData(char **pp2parse, char *pResult)
{
char *p2parse;
int bCont = 1;
int iRet = 0;
assert(pp2parse != NULL);
assert(*pp2parse != NULL);
assert(pResult != NULL);
p2parse = *pp2parse;
/* this is the actual parsing loop
* Remeber: structured data starts with [ and includes any characters
* until the first ] followed by a SP. There may be spaces inside
* structured data. There may also be \] inside the structured data, which
* do NOT terminate an element.
*/
if(*p2parse != '[')
return 1; /* this is NOT structured data! */
while(bCont) {
if(*p2parse == '\0') {
iRet = 1; /* this is not valid! */
bCont = 0;
} else if(*p2parse == '\\' && *(p2parse+1) == ']') {
/* this is escaped, need to copy both */
*pResult++ = *p2parse++;
*pResult++ = *p2parse++;
} else if(*p2parse == ']' && *(p2parse+1) == ' ') {
/* found end, just need to copy the ] and eat the SP */
*pResult++ = *p2parse;
p2parse += 2;
bCont = 0;
} else {
*pResult++ = *p2parse++;
}
}
if(*p2parse == ' ')
++p2parse; /* eat SP, but only if not at end of string */
else
iRet = 1; /* there MUST be an SP! */
*pResult = '\0';
/* set the new parse pointer */
*pp2parse = p2parse;
return 0;
}
/* parse a RFC-formatted syslog message. This function returns
* 0 if processing of the message shall continue and 1 if something
* went wrong and this messe should be ignored. This function has been
* implemented in the effort to support syslog-protocol. Please note that
* the name (parse *RFC*) stems from the hope that syslog-protocol will
* some time become an RFC. Do not confuse this with informational
* RFC 3164 (which is legacy syslog).
*
* currently supported format:
*
* <PRI>VERSION SP TIMESTAMP SP HOSTNAME SP APP-NAME SP PROCID SP MSGID SP [SD-ID]s SP MSG
*
* <PRI> is already stripped when this function is entered. VERSION already
* has been confirmed to be "1", but has NOT been stripped from the message.
*
* rger, 2005-11-24
*/
static int parseRFCSyslogMsg(msg_t *pMsg, int flags)
{
char *p2parse;
char *pBuf;
int bContParse = 1;
assert(pMsg != NULL);
assert(pMsg->pszUxTradMsg != NULL);
p2parse = (char*) pMsg->pszUxTradMsg;
/* do a sanity check on the version and eat it */
assert(p2parse[0] == '1' && p2parse[1] == ' ');
p2parse += 2;
/* Now get us some memory we can use as a work buffer while parsing.
* We simply allocated a buffer sufficiently large to hold all of the
* message, so we can not run into any troubles. I think this is
* more wise then to use individual buffers.
*/
if((pBuf = malloc(sizeof(char)* strlen(p2parse) + 1)) == NULL)
return 1;
/* IMPORTANT NOTE:
* Validation is not actually done below nor are any errors handled. I have
* NOT included this for the current proof of concept. However, it is strongly
* advisable to add it when this code actually goes into production.
* rgerhards, 2005-11-24
*/
/* TIMESTAMP */
if(srSLMGParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == FALSE) {
dbgprintf("no TIMESTAMP detected!\n");
bContParse = 0;
flags |= ADDDATE;
}
if (flags & ADDDATE) {
getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */
}
/* HOSTNAME */
if(bContParse) {
parseRFCField(&p2parse, pBuf);
MsgSetHOSTNAME(pMsg, pBuf);
} else {
/* we can not parse, so we get the system we
* received the data from.
*/
MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
}
/* APP-NAME */
if(bContParse) {
parseRFCField(&p2parse, pBuf);
MsgSetAPPNAME(pMsg, pBuf);
}
/* PROCID */
if(bContParse) {
parseRFCField(&p2parse, pBuf);
MsgSetPROCID(pMsg, pBuf);
}
/* MSGID */
if(bContParse) {
parseRFCField(&p2parse, pBuf);
MsgSetMSGID(pMsg, pBuf);
}
/* STRUCTURED-DATA */
if(bContParse) {
parseRFCStructuredData(&p2parse, pBuf);
MsgSetStructuredData(pMsg, pBuf);
}
/* MSG */
MsgSetMSG(pMsg, p2parse);
free(pBuf);
return 0; /* all ok */
}
/* parse a legay-formatted syslog message. This function returns
* 0 if processing of the message shall continue and 1 if something
* went wrong and this messe should be ignored. This function has been
* implemented in the effort to support syslog-protocol.
* rger, 2005-11-24
* As of 2006-01-10, I am removing the logic to continue parsing only
* when a valid TIMESTAMP is detected. Validity of other fields already
* is ignored. This is due to the fact that the parser has grown smarter
* and is now more able to understand different dialects of the syslog
* message format. I do not expect any bad side effects of this change,
* but I thought I log it in this comment.
* rgerhards, 2006-01-10
*/
static int parseLegacySyslogMsg(msg_t *pMsg, int flags)
{
char *p2parse;
char *pBuf;
char *pWork;
rsCStrObj *pStrB;
int iCnt;
int bTAGCharDetected;
assert(pMsg != NULL);
assert(pMsg->pszUxTradMsg != NULL);
p2parse = (char*) pMsg->pszUxTradMsg;
/* Check to see if msg contains a timestamp
*/
if(srSLMGParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), p2parse) == TRUE)
p2parse += 16;
else {
flags |= ADDDATE;
}
/* here we need to check if the timestamp is valid. If it is not,
* we can not continue to parse but must treat the rest as the
* MSG part of the message (as of RFC 3164).
* rgerhards 2004-12-03
*/
if(flags & ADDDATE) {
getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */
}
/* rgerhards, 2006-03-13: next, we parse the hostname and tag. But we
* do this only when the user has not forbidden this. I now introduce some
* code that allows a user to configure rsyslogd to treat the rest of the
* message as MSG part completely. In this case, the hostname will be the
* machine that we received the message from and the tag will be empty. This
* is meant to be an interim solution, but for now it is in the code.
*/
if(bParseHOSTNAMEandTAG && !(flags & INTERNAL_MSG)) {
/* parse HOSTNAME - but only if this is network-received!
* rger, 2005-11-14: we still have a problem with BSD messages. These messages
* do NOT include a host name. In most cases, this leads to the TAG to be treated
* as hostname and the first word of the message as the TAG. Clearly, this is not
* of advantage ;) I think I have now found a way to handle this situation: there
* are certain characters which are frequently used in TAG (e.g. ':'), which are
* *invalid* in host names. So while parsing the hostname, I check for these characters.
* If I find them, I set a simple flag but continue. After parsing, I check the flag.
* If it was set, then we most probably do not have a hostname but a TAG. Thus, I change
* the fields. I think this logic shall work with any type of syslog message.
*/
bTAGCharDetected = 0;
if(pMsg->bParseHOSTNAME) {
/* TODO: quick and dirty memory allocation */
/* the memory allocated is far too much in most cases. But on the plus side,
* it is quite fast... - rgerhards, 2007-09-20
*/
if((pBuf = malloc(sizeof(char)* (strlen(p2parse) +1))) == NULL)
return 1;
pWork = pBuf;
/* this is the actual parsing loop */
while(*p2parse && *p2parse != ' ' && *p2parse != ':') {
if(*p2parse == '[' || *p2parse == ']' || *p2parse == '/')
bTAGCharDetected = 1;
*pWork++ = *p2parse++;
}
/* we need to handle ':' seperately, because it terminates the
* TAG - so we also need to terminate the parser here!
* rgerhards, 2007-09-10 *p2parse points to a valid address here in
* any case. We can reach this point only if we are at end of string,
* or we have a ':' or ' '. What the if below does is check if we are
* not at end of string and, if so, advance the parse pointer. If we
* are already at end of string, *p2parse is equal to '\0', neither if
* will be true and the parse pointer remain as is. This is perfectly
* well.
*/
if(*p2parse == ':') {
bTAGCharDetected = 1;
++p2parse;
} else if(*p2parse == ' ')
++p2parse;
*pWork = '\0';
MsgAssignHOSTNAME(pMsg, pBuf);
}
/* check if we seem to have a TAG */
if(bTAGCharDetected) {
/* indeed, this smells like a TAG, so lets use it for this. We take
* the HOSTNAME from the sender system instead.
*/
dbgprintf("HOSTNAME contains invalid characters, assuming it to be a TAG.\n");
moveHOSTNAMEtoTAG(pMsg);
MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
}
/* now parse TAG - that should be present in message from
* all sources.
* This code is somewhat not compliant with RFC 3164. As of 3164,
* the TAG field is ended by any non-alphanumeric character. In
* practice, however, the TAG often contains dashes and other things,
* which would end the TAG. So it is not desirable. As such, we only
* accept colon and SP to be terminators. Even there is a slight difference:
* a colon is PART of the TAG, while a SP is NOT part of the tag
* (it is CONTENT). Finally, we allow only up to 32 characters for
* TAG, as it is specified in RFC 3164.
*/
/* The following code in general is quick & dirty - I need to get
* it going for a test, rgerhards 2004-11-16 */
/* lol.. we tried to solve it, just to remind ourselfs that 32 octets
* is the max size ;) we need to shuffle the code again... Just for
* the records: the code is currently clean, but we could optimize it! */
if(!bTAGCharDetected) {
uchar *pszTAG;
if((pStrB = rsCStrConstruct()) == NULL)
return 1;
rsCStrSetAllocIncrement(pStrB, 33);
pWork = pBuf;
iCnt = 0;
while(*p2parse && *p2parse != ':' && *p2parse != ' ' && iCnt < 32) {
rsCStrAppendChar(pStrB, *p2parse++);
++iCnt;
}
if(*p2parse == ':') {
++p2parse;
rsCStrAppendChar(pStrB, ':');
}
rsCStrFinish(pStrB);
rsCStrConvSzStrAndDestruct(pStrB, &pszTAG, 1);
if(pszTAG == NULL)
{ /* rger, 2005-11-10: no TAG found - this implies that what
* we have considered to be the HOSTNAME is most probably the
* TAG. We consider it so probable, that we now adjust it
* that way. So we pick up the previously set hostname, assign
* it to tag and use the sender system (from IP stack) as
* the hostname. This situation is the standard case with
* stock BSD syslogd.
*/
dbgprintf("No TAG in message, assuming that HOSTNAME is missing.\n");
moveHOSTNAMEtoTAG(pMsg);
MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
} else { /* we have a TAG, so we can happily set it ;) */
MsgAssignTAG(pMsg, pszTAG);
}
} else {
/* we have no TAG, so we ... */
/*DO NOTHING*/;
}
} else {
/* we enter this code area when the user has instructed rsyslog NOT
* to parse HOSTNAME and TAG - rgerhards, 2006-03-13
*/
if(!(flags & INTERNAL_MSG))
{
dbgprintf("HOSTNAME and TAG not parsed by user configuraton.\n");
MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
}
}
/* The rest is the actual MSG */
MsgSetMSG(pMsg, p2parse);
return 0; /* all ok */
}
/*
* Log a message to the appropriate log files, users, etc. based on
* the priority.
* rgerhards 2004-11-08: actually, this also decodes all but the PRI part.
* rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized
* if not, we use emergency logging to the console and in
* this case, no further decoding happens.
* changed to no longer receive a plain message but a msg object instead.
* rgerhards-2004-11-16: OK, we are now up to another change... This method
* actually needs to PARSE the message. How exactly this needs to happen depends on
* a number of things. Most importantly, it depends on the source. For example,
* locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So
* we need to treat them differntly form network-received messages which have.
* Well, actually not all network-received message really have a hostname. We
* can just hope they do, but we can not be sure. So this method tries to find
* whatever can be found in the message and uses that... Obviously, there is some
* potential for misinterpretation, which we simply can not solve under the
* circumstances given.
*/
void
logmsg(int pri, msg_t *pMsg, int flags)
{
char *msg;
char PRItext[20];
assert(pMsg != NULL);
assert(pMsg->pszUxTradMsg != NULL);
msg = (char*) pMsg->pszUxTradMsg;
dbgprintf("logmsg: %s, flags %x, from '%s', msg %s\n",
textpri(PRItext, sizeof(PRItext) / sizeof(char), pri),
flags, getRcvFrom(pMsg), msg);
/* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have
* a traditional syslog message or one formatted according to syslog-protocol.
* We need to apply different parsers depending on that. We use the
* -protocol VERSION field for the detection.
*/
if(msg[0] == '1' && msg[1] == ' ') {
dbgprintf("Message has syslog-protocol format.\n");
setProtocolVersion(pMsg, 1);
if(parseRFCSyslogMsg(pMsg, flags) == 1) {
MsgDestruct(pMsg);
return;
}
} else { /* we have legacy syslog */
dbgprintf("Message has legacy syslog format.\n");
setProtocolVersion(pMsg, 0);
if(parseLegacySyslogMsg(pMsg, flags) == 1) {
MsgDestruct(pMsg);
return;
}
}
/* ---------------------- END PARSING ---------------- */
/* rgerhards, 2005-10-13: if we consider going multi-threaded, this
* is probably the best point to split between a producer and a consumer
* thread. In general, with the first multi-threaded approach, we should
* NOT try to do more than have a single producer and consumer, at least
* if both are from the current code base. The issue is that this code
* was definitely not written with reentrancy in mind and uses a lot of
* global variables. So it is very dangerous to simply go ahead and multi
* thread it. However, I think there is a clear distinction between
* producer (where data is received) and consumer (where the actions are).
* It should be fairly safe to create a single thread for each and run them
* concurrently, thightly coupled via an in-memory queue. Even with this
* limited multithraeding, benefits are immediate: the lengthy actions
* (database writes!) are de-coupled from the receivers, what should result
* in less likely message loss (loss due to receiver overrun). It also allows
* us to utilize 2-cpu systems, which will soon be common given the current
* advances in multicore CPU hardware. So this is well worth trying.
* Another plus of this two-thread-approach would be that it can easily be configured,
* so if there are compatibility issues with the threading libs, we could simply
* disable it (as a makefile feature).
* There is one important thing to keep in mind when doing this basic
* multithreading. The syslog/tcp message forwarder manipulates a structutre
* that is used by the main thread, which actually sends the data. This
* structure must be guarded by a mutex, else we will have race conditions and
* some very bad things could happen.
*
* Additional consumer threads might be added relatively easy for new receivers,
* e.g. if we decide to move RFC 3195 via liblogging natively into rsyslogd.
*
* To aid this functionality, I am moving the rest of the code (the actual
* consumer) to its own method, now called "processMsg()".
*
* rgerhards, 2005-10-25: as of now, the dual-threading code is now in place.
* It is an optional feature and even when enabled, rsyslogd will run single-threaded
* if it gets any errors during thread creation.
*/
pMsg->msgFlags = flags;
enqueueMsg(pMsg);
}
/* rgerhards 2004-11-09: fprintlog() is the actual driver for
* the output channel. It receives the channel description (f) as
* well as the message and outputs them according to the channel
* semantics. The message is typically already contained in the
* channel save buffer (f->f_prevline). This is not only the case
* when a message was already repeated but also when a new message
* arrived.
* rgerhards 2007-08-01: interface changed to use action_t
* rgerhards, 2007-12-11: please note: THIS METHOD MUST ONLY BE
* CALLED AFTER THE CALLER HAS LOCKED THE pAction OBJECT! We do
* not do this here. Failing to do so results in all kinds of
* "interesting" problems!
*/
rsRetVal
fprintlog(action_t *pAction)
{
msg_t *pMsgSave; /* to save current message pointer, necessary to restore
it in case it needs to be updated (e.g. repeated msgs) */
DEFiRet;
int i;
pMsgSave = NULL; /* indicate message poiner not saved */
/* first check if this is a regular message or the repeation of
* a previous message. If so, we need to change the message text
* to "last message repeated n times" and then go ahead and write
* it. Please note that we can not modify the message object, because
* that would update it in other selectors as well. As such, we first
* need to create a local copy of the message, which we than can update.
* rgerhards, 2007-07-10
*/
if(pAction->f_prevcount > 1) {
msg_t *pMsg;
uchar szRepMsg[64];
snprintf((char*)szRepMsg, sizeof(szRepMsg), "last message repeated %d times",
pAction->f_prevcount);
if((pMsg = MsgDup(pAction->f_pMsg)) == NULL) {
/* it failed - nothing we can do against it... */
dbgprintf("Message duplication failed, dropping repeat message.\n");
return RS_RET_ERR;
/* This return is OK. The finalizer frees strings, which are not
* yet allocated. So we can not use the finalizer.
*/
}
/* We now need to update the other message properties.
* ... RAWMSG is a problem ... Please note that digital
* signatures inside the message are also invalidated.
*/
getCurrTime(&(pMsg->tRcvdAt));
getCurrTime(&(pMsg->tTIMESTAMP));
MsgSetMSG(pMsg, (char*)szRepMsg);
MsgSetRawMsg(pMsg, (char*)szRepMsg);
pMsgSave = pAction->f_pMsg; /* save message pointer for later restoration */
pAction->f_pMsg = pMsg; /* use the new msg (pointer will be restored below) */
}
dbgprintf("Called fprintlog, logging to %s", modGetStateName(pAction->pMod));
time(&pAction->f_time); /* we need this for message repeation processing */
/* When we reach this point, we have a valid, non-disabled action.
* So let's execute it. -- rgerhards, 2007-07-24
*/
/* here we must loop to process all requested strings */
for(i = 0 ; i < pAction->iNumTpls ; ++i) {
CHKiRet(tplToString(pAction->ppTpl[i], pAction->f_pMsg, &pAction->ppMsgs[i]));
}
/* call configured action */
iRet = pAction->pMod->mod.om.doAction(pAction->ppMsgs, pAction->f_pMsg->msgFlags, pAction->pModData);
if(iRet == RS_RET_DISABLE_ACTION) {
dbgprintf("Action requested to be disabled, done that.\n");
pAction->bEnabled = 0; /* that's it... */
}
if(iRet == RS_RET_SUSPENDED) {
dbgprintf("Action requested to be suspended, done that.\n");
actionSuspend(pAction);
}
if(iRet == RS_RET_OK)
pAction->f_prevcount = 0; /* message processed, so we start a new cycle */
finalize_it:
/* cleanup */
for(i = 0 ; i < pAction->iNumTpls ; ++i) {
if(pAction->ppMsgs[i] != NULL) {
free(pAction->ppMsgs[i]);
pAction->ppMsgs[i] = NULL;
}
}
if(pMsgSave != NULL) {
/* we had saved the original message pointer. That was
* done because we needed to create a temporary one
* (most often for "message repeated n time" handling). If so,
* we need to restore the original one now, so that procesing
* can continue as normal. We also need to discard the temporary
* one, as we do not like memory leaks ;) Please note that the original
* message object will be discarded by our callers, so this is nothing
* of our business. rgerhards, 2007-07-10
*/
MsgDestruct(pAction->f_pMsg);
pAction->f_pMsg = pMsgSave; /* restore it */
}
return iRet;
}
static void
reapchild()
{
int saved_errno = errno;
struct sigaction sigAct;
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = reapchild;
sigaction(SIGCHLD, &sigAct, NULL); /* reset signal handler -ASP */
while(waitpid(-1, NULL, WNOHANG) > 0);
errno = saved_errno;
}
/* helper to domark to flush the individual action links via llExecFunc
* rgerhards, 2007-08-02
*/
DEFFUNC_llExecFunc(domarkActions)
{
action_t *pAction = (action_t*) pData;
assert(pAction != NULL);
LockObj(pAction);
if (pAction->f_prevcount && time(NULL) >= REPEATTIME(pAction)) {
dbgprintf("flush %s: repeated %d times, %d sec.\n",
modGetStateName(pAction->pMod), pAction->f_prevcount,
repeatinterval[pAction->f_repeatcount]);
fprintlog(pAction);
BACKOFF(pAction);
}
UnlockObj(pAction);
return RS_RET_OK; /* we ignore errors, we can not do anything either way */
}
/* This method writes mark messages and - some time later - flushes reapeat
* messages.
* This method was initially called by an alarm handler. As such, it could potentially
* have race-conditons. For details, see
* http://lkml.org/lkml/2005/3/26/37
* http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=301511
* I have now changed it so that the alarm handler only sets a global variable, telling
* the main thread that it must do mark processing. So domark() is now called from the
* main thread itself, which is the only thing to make sure rsyslogd will not do
* strange things. The way it originally was seemed to work because mark occurs very
* seldom. However, the code called was anything else but reentrant, so it was like
* russian roulette. - rgerhards, 2005-10-20
* rgerhards, 2007-12-11: ... and it still is, if running multithreaded. Because in this
* case we run concurrently to the actions... I have now fixed that by using synchronization
* macros.
*/
static void
domark(void)
{
register selector_t *f;
if (MarkInterval > 0) {
/* see if we need to flush any "message repeated n times"...
* Note that this interferes with objects running on another thread.
* We are using appropriate locking inside the function to handle that.
*/
for (f = Files; f != NULL ; f = f->f_next) {
llExecFunc(&f->llActList, domarkActions, NULL);
}
}
}
/* This is the alarm handler setting the global variable for
* domark request. See domark() comments for further details.
* rgerhards, 2005-10-20
*/
static void
domarkAlarmHdlr()
{
struct sigaction sigAct;
bRequestDoMark = 1; /* request alarm */
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = domarkAlarmHdlr;
sigaction(SIGALRM, &sigAct, NULL);
(void) alarm(TIMERINTVL);
}
static void debug_switch()
{
struct sigaction sigAct;
dbgprintf("Switching debugging_on to %s\n", (debugging_on == 0) ? "true" : "false");
debugging_on = (debugging_on == 0) ? 1 : 0;
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = debug_switch;
sigaction(SIGUSR1, &sigAct, NULL);
}
/*
* Add a string to error message and send it to logerror()
* The error message is passed to snprintf() and must be
* correctly formatted for it (containing a single %s param).
* rgerhards 2005-09-19
*/
void logerrorSz(char *type, char *errMsg)
{
char buf[1024];
snprintf(buf, sizeof(buf), type, errMsg);
buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
logerror(buf);
return;
}
/*
* Add an integer to error message and send it to logerror()
* The error message is passed to snprintf() and must be
* correctly formatted for it (containing a single %d param).
* rgerhards 2005-09-19
*/
void logerrorInt(char *type, int errCode)
{
char buf[1024];
snprintf(buf, sizeof(buf), type, errCode);
buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
logerror(buf);
return;
}
/* Print syslogd errors some place.
*/
void logerror(char *type)
{
char buf[1024];
char errStr[1024];
dbgprintf("Called logerr, msg: %s\n", type);
if (errno == 0)
snprintf(buf, sizeof(buf), "%s", type);
else {
strerror_r(errno, errStr, sizeof(errStr));
snprintf(buf, sizeof(buf), "%s: %s", type, errStr);
}
buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
errno = 0;
logmsgInternal(LOG_SYSLOG|LOG_ERR, buf, ADDDATE);
return;
}
/* doDie() is a signal handler. If called, it sets the bFinished variable
* to indicate the program should terminate. However, it does not terminate
* it itself, because that causes issues with multi-threading. The actual
* termination is then done on the main thread. This solution might introduce
* a minimal delay, but it is much cleaner than the approach of doing everything
* inside the signal handler.
* rgerhards, 2005-10-26
*/
static void doDie(int sig)
{
dbgprintf("DoDie called.\n");
bFinished = sig;
}
/* die() is called when the program shall end. This typically only occurs
* during sigterm or during the initialization.
* As die() is intended to shutdown rsyslogd, it is
* safe to call exit() here. Just make sure that die() itself is not called
* at inapropriate places. As a general rule of thumb, it is a bad idea to add
* any calls to die() in new code!
* rgerhards, 2005-10-24
*/
static void die(int sig)
{
char buf[256];
if (sig) {
dbgprintf(" exiting on signal %d\n", sig);
(void) snprintf(buf, sizeof(buf) / sizeof(char),
" [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
"\" x-pid=\"%d\"]" " exiting on signal %d.",
(int) myPid, sig);
errno = 0;
logmsgInternal(LOG_SYSLOG|LOG_INFO, buf, ADDDATE);
}
/* close the inputs */
thrdTerminateAll(); /* TODO: inputs only, please */
/* Free ressources and close connections */
freeSelectors();
/* Worker threads are stopped by freeSelectors() */
queueDelete(pMsgQueue); /* delete fifo here! */
pMsgQueue = NULL;
/* now clean up the listener part */
#ifdef SYSLOG_INET
/* Close the UDP inet socket. */
closeUDPListenSockets();
/* Close the TCP inet socket. */
if(sockTCPLstn != NULL && *sockTCPLstn) {
deinit_tcp_listener();
}
#ifdef USE_GSSAPI
if(bEnableTCP & ALLOWEDMETHOD_GSS)
TCPSessGSSDeinit();
#endif
#endif
/* rger 2005-02-22
* now clean up the in-memory structures. OK, the OS
* would also take care of that, but if we do it
* ourselfs, this makes finding memory leaks a lot
* easier.
*/
tplDeleteAll();
remove_pid(PidFile);
if(glblHadMemShortage)
dbgprintf("Had memory shortage at least once during the run.\n");
/* de-init some modules */
modExitIminternal();
/* TODO: this would also be the right place to de-init the builtin output modules. We
* do not currently do that, because the module interface does not allow for
* it. This will come some time later (it's essential with loadable modules).
* For the time being, this is a memory leak on exit, but as the process is
* terminated, we do not really bother about it.
* rgerhards, 2007-08-03
* I have added some code now, but all that mod init/de-init should be moved to
* init, so that modules are unloaded and reloaded on HUP to. Eventually it should go
* into freeSelectors() - but that needs to be seen. -- rgerhards, 2007-08-09
*/
modUnloadAndDestructAll();
/* the following line cleans up CfSysLineHandlers that were not based on loadable
* modules. As such, they are not yet cleared.
*/
unregCfSysLineHdlrs();
/* clean up auxiliary data */
if(pModDir != NULL)
free(pModDir);
dbgprintf("Clean shutdown completed, bye.\n");
exit(0); /* "good" exit, this is the terminator function for rsyslog [die()] */
}
/*
* Signal handler to terminate the parent process.
* rgerhards, 2005-10-24: this is only called during forking of the
* detached syslogd. I consider this method to be safe.
*/
static void doexit()
{
exit(0); /* "good" exit, only during child-creation */
}
/* parse an allowed sender config line and add the allowed senders
* (if the line is correct).
* rgerhards, 2005-09-27
*/
static rsRetVal addAllowedSenderLine(char* pName, uchar** ppRestOfConfLine)
{
#ifdef SYSLOG_INET
struct AllowedSenders **ppRoot;
struct AllowedSenders **ppLast;
rsParsObj *pPars;
rsRetVal iRet;
struct NetAddr *uIP = NULL;
int iBits;
#endif
assert(pName != NULL);
assert(ppRestOfConfLine != NULL);
assert(*ppRestOfConfLine != NULL);
#ifndef SYSLOG_INET
errno = 0;
logerror("config file contains allowed sender list, but rsyslogd "
"compiled without Internet support - line ignored");
return RS_RET_ERR;
#else
if(!strcasecmp(pName, "udp")) {
ppRoot = &pAllowedSenders_UDP;
ppLast = &pLastAllowedSenders_UDP;
} else if(!strcasecmp(pName, "tcp")) {
ppRoot = &pAllowedSenders_TCP;
ppLast = &pLastAllowedSenders_TCP;
#ifdef USE_GSSAPI
} else if(!strcasecmp(pName, "gss")) {
ppRoot = &pAllowedSenders_GSS;
ppLast = &pLastAllowedSenders_GSS;
#endif
} else {
logerrorSz("Invalid protocol '%s' in allowed sender "
"list, line ignored", pName);
return RS_RET_ERR;
}
/* OK, we now know the protocol and have valid list pointers.
* So let's process the entries. We are using the parse class
* for this.
*/
/* create parser object starting with line string without leading colon */
if((iRet = rsParsConstructFromSz(&pPars, (uchar*) *ppRestOfConfLine) != RS_RET_OK)) {
logerrorInt("Error %d constructing parser object - ignoring allowed sender list", iRet);
return(iRet);
}
while(!parsIsAtEndOfParseString(pPars)) {
if(parsPeekAtCharAtParsPtr(pPars) == '#')
break; /* a comment-sign stops processing of line */
/* now parse a single IP address */
if((iRet = parsAddrWithBits(pPars, &uIP, &iBits)) != RS_RET_OK) {
logerrorInt("Error %d parsing address in allowed sender"
"list - ignoring.", iRet);
rsParsDestruct(pPars);
return(iRet);
}
if((iRet = AddAllowedSender(ppRoot, ppLast, uIP, iBits))
!= RS_RET_OK) {
if (iRet == RS_RET_NOENTRY) {
logerrorInt("Error %d adding allowed sender entry "
"- ignoring.", iRet);
} else {
logerrorInt("Error %d adding allowed sender entry "
"- terminating, nothing more will be added.", iRet);
rsParsDestruct(pPars);
return(iRet);
}
}
free (uIP); /* copy stored in AllowedSenders list */
}
/* cleanup */
*ppRestOfConfLine += parsGetCurrentPosition(pPars);
return rsParsDestruct(pPars);
#endif /*#ifndef SYSLOG_INET */
}
/* process a directory and include all of its files into
* the current config file. There is no specific order of inclusion,
* files are included in the order they are read from the directory.
* The caller must have make sure that the provided parameter is
* indeed a directory.
* rgerhards, 2007-08-01
*/
static rsRetVal doIncludeDirectory(uchar *pDirName)
{
DEFiRet;
int iEntriesDone = 0;
DIR *pDir;
union {
struct dirent d;
char b[offsetof(struct dirent, d_name) + NAME_MAX + 1];
} u;
struct dirent *res;
size_t iDirNameLen;
size_t iFileNameLen;
uchar szFullFileName[MAXFNAME];
assert(pDirName != NULL);
if((pDir = opendir((char*) pDirName)) == NULL) {
logerror("error opening include directory");
ABORT_FINALIZE(RS_RET_FOPEN_FAILURE);
}
/* prepare file name buffer */
iDirNameLen = strlen((char*) pDirName);
memcpy(szFullFileName, pDirName, iDirNameLen);
/* now read the directory */
iEntriesDone = 0;
while(readdir_r(pDir, &u.d, &res) == 0) {
if(res == NULL)
break; /* this also indicates end of directory */
if(res->d_type != DT_REG)
continue; /* we are not interested in special files */
if(res->d_name[0] == '.')
continue; /* these files we are also not interested in */
++iEntriesDone;
/* construct filename */
iFileNameLen = strlen(res->d_name);
if (iFileNameLen > NAME_MAX)
iFileNameLen = NAME_MAX;
memcpy(szFullFileName + iDirNameLen, res->d_name, iFileNameLen);
*(szFullFileName + iDirNameLen + iFileNameLen) = '\0';
dbgprintf("including file '%s'\n", szFullFileName);
processConfFile(szFullFileName);
/* we deliberately ignore the iRet of processConfFile() - this is because
* failure to process one file does not mean all files will fail. By ignoring,
* we retry with the next file, which is the best thing we can do. -- rgerhards, 2007-08-01
*/
}
if(iEntriesDone == 0) {
/* I just make it a debug output, because I can think of a lot of cases where it
* makes sense not to have any files. E.g. a system maintainer may place a $Include
* into the config file just in case, when additional modules be installed. When none
* are installed, the directory will be empty, which is fine. -- rgerhards 2007-08-01
*/
dbgprintf("warning: the include directory contained no files - this may be ok.\n");
}
finalize_it:
if(pDir != NULL)
closedir(pDir);
return iRet;
}
/* process a $include config line. That type of line requires
* inclusion of another file.
* rgerhards, 2007-08-01
*/
static rsRetVal doIncludeLine(uchar **pp, __attribute__((unused)) void* pVal)
{
DEFiRet;
char pattern[MAXFNAME];
uchar *cfgFile;
glob_t cfgFiles;
size_t i = 0;
struct stat fileInfo;
assert(pp != NULL);
assert(*pp != NULL);
if(getSubString(pp, (char*) pattern, sizeof(pattern) / sizeof(char), ' ') != 0) {
logerror("could not extract group name");
ABORT_FINALIZE(RS_RET_NOT_FOUND);
}
/* Use GLOB_MARK to append a trailing slash for directories.
* Required by doIncludeDirectory().
*/
glob(pattern, GLOB_MARK, NULL, &cfgFiles);
for(i = 0; i < cfgFiles.gl_pathc; i++) {
cfgFile = (uchar*) cfgFiles.gl_pathv[i];
if(stat((char*) cfgFile, &fileInfo) != 0)
continue; /* continue with the next file if we can't stat() the file */
if(S_ISREG(fileInfo.st_mode)) { /* config file */
dbgprintf("requested to include config file '%s'\n", cfgFile);
iRet = processConfFile(cfgFile);
} else if(S_ISDIR(fileInfo.st_mode)) { /* config directory */
dbgprintf("requested to include directory '%s'\n", cfgFile);
iRet = doIncludeDirectory(cfgFile);
} else { /* TODO: shall we handle symlinks or not? */
dbgprintf("warning: unable to process IncludeConfig directive '%s'\n", cfgFile);
}
}
globfree(&cfgFiles);
finalize_it:
return iRet;
}
/* process a $ModLoad config line.
* As of now, it is a dummy, that will later evolve into the
* loader for plug-ins.
* rgerhards, 2007-07-21
* varmojfekoj added support for dynamically loadable modules on 2007-08-13
* rgerhards, 2007-09-25: please note that the non-threadsafe function dlerror() is
* called below. This is ok because modules are currently only loaded during
* configuration file processing, which is executed on a single thread. Should we
* change that design at any stage (what is unlikely), we need to find a
* replacement.
*/
static rsRetVal doModLoad(uchar **pp, __attribute__((unused)) void* pVal)
{
DEFiRet;
uchar szName[512];
uchar szPath[512];
uchar errMsg[1024];
uchar *pModName;
void *pModHdlr, *pModInit;
assert(pp != NULL);
assert(*pp != NULL);
if(getSubString(pp, (char*) szName, sizeof(szName) / sizeof(uchar), ' ') != 0) {
logerror("could not extract module name");
ABORT_FINALIZE(RS_RET_NOT_FOUND);
}
/* this below is a quick and dirty hack to provide compatibility with the
* $ModLoad MySQL forward compatibility statement. TODO: clean this up
* For the time being, it is clean enough, it just needs to be done
* differently when we have a full design for loadable plug-ins. For the
* time being, we just mangle the names a bit.
* rgerhards, 2007-08-14
*/
if(!strcmp((char*) szName, "MySQL"))
pModName = (uchar*) "ommysql.so";
else
pModName = szName;
dbgprintf("Requested to load module '%s'\n", szName);
if(*pModName == '/') {
*szPath = '\0'; /* we do not need to append the path - its already in the module name */
} else {
strncpy((char *) szPath, (pModDir == NULL) ? _PATH_MODDIR : (char*) pModDir, sizeof(szPath));
}
strncat((char *) szPath, (char *) pModName, sizeof(szPath) - strlen((char*) szPath) - 1);
if(!(pModHdlr = dlopen((char *) szPath, RTLD_NOW))) {
snprintf((char *) errMsg, sizeof(errMsg), "could not load module '%s', dlopen: %s\n", szPath, dlerror());
errMsg[sizeof(errMsg)/sizeof(uchar) - 1] = '\0';
logerror((char *) errMsg);
ABORT_FINALIZE(RS_RET_ERR);
}
if(!(pModInit = dlsym(pModHdlr, "modInit"))) {
snprintf((char *) errMsg, sizeof(errMsg), "could not load module '%s', dlsym: %s\n", szPath, dlerror());
errMsg[sizeof(errMsg)/sizeof(uchar) - 1] = '\0';
logerror((char *) errMsg);
dlclose(pModHdlr);
ABORT_FINALIZE(RS_RET_ERR);
}
if((iRet = doModInit(pModInit, (uchar*) pModName, pModHdlr)) != RS_RET_OK) {
snprintf((char *) errMsg, sizeof(errMsg), "could not load module '%s', rsyslog error %d\n", szPath, iRet);
errMsg[sizeof(errMsg)/sizeof(uchar) - 1] = '\0';
logerror((char *) errMsg);
dlclose(pModHdlr);
ABORT_FINALIZE(RS_RET_ERR);
}
skipWhiteSpace(pp); /* skip over any whitespace */
finalize_it:
return iRet;
}
/* parse and interpret a $-config line that starts with
* a name (this is common code). It is parsed to the name
* and then the proper sub-function is called to handle
* the actual directive.
* rgerhards 2004-11-17
* rgerhards 2005-06-21: previously only for templates, now
* generalized.
*/
static rsRetVal doNameLine(uchar **pp, void* pVal)
{
DEFiRet;
uchar *p;
enum eDirective eDir;
char szName[128];
assert(pp != NULL);
p = *pp;
assert(p != NULL);
eDir = (enum eDirective) pVal; /* this time, it actually is NOT a pointer! */
if(getSubString(&p, szName, sizeof(szName) / sizeof(char), ',') != 0) {
logerror("Invalid config line: could not extract name - line ignored");
ABORT_FINALIZE(RS_RET_NOT_FOUND);
}
if(*p == ',')
++p; /* comma was eaten */
/* we got the name - now we pass name & the rest of the string
* to the subfunction. It makes no sense to do further
* parsing here, as this is in close interaction with the
* respective subsystem. rgerhards 2004-11-17
*/
switch(eDir) {
case DIR_TEMPLATE:
tplAddLine(szName, &p);
break;
case DIR_OUTCHANNEL:
ochAddLine(szName, &p);
break;
case DIR_ALLOWEDSENDER:
addAllowedSenderLine(szName, &p);
break;
default:/* we do this to avoid compiler warning - not all
* enum values call this function, so an incomplete list
* is quite ok (but then we should not run into this code,
* so at least we log a debug warning).
*/
dbgprintf("INTERNAL ERROR: doNameLine() called with invalid eDir %d.\n",
eDir);
break;
}
*pp = p;
finalize_it:
return iRet;
}
/* set the action resume interval
*/
static rsRetVal setActionResumeInterval(void __attribute__((unused)) *pVal, int iNewVal)
{
return actionSetGlobalResumeInterval(iNewVal);
}
/* set the processes umask (upon configuration request)
*/
static rsRetVal setUmask(void __attribute__((unused)) *pVal, int iUmask)
{
umask(iUmask);
dbgprintf("umask set to 0%3.3o.\n", iUmask);
return RS_RET_OK;
}
/* Parse and interpret a system-directive in the config line
* A system directive is one that starts with a "$" sign. It offers
* extended configuration parameters.
* 2004-11-17 rgerhards
*/
rsRetVal cfsysline(uchar *p)
{
DEFiRet;
uchar szCmd[64];
uchar errMsg[128]; /* for dynamic error messages */
assert(p != NULL);
errno = 0;
if(getSubString(&p, (char*) szCmd, sizeof(szCmd) / sizeof(uchar), ' ') != 0) {
logerror("Invalid $-configline - could not extract command - line ignored\n");
ABORT_FINALIZE(RS_RET_NOT_FOUND);
}
/* we now try and see if we can find the command in the registered
* list of cfsysline handlers. -- rgerhards, 2007-07-31
*/
CHKiRet(processCfSysLineCommand(szCmd, &p));
/* now check if we have some extra characters left on the line - that
* should not be the case. Whitespace is OK, but everything else should
* trigger a warning (that may be an indication of undesired behaviour).
* An exception, of course, are comments (starting with '#').
* rgerhards, 2007-07-04
*/
skipWhiteSpace(&p);
if(*p && *p != '#') { /* we have a non-whitespace, so let's complain */
snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
"error: extra characters in config line ignored: '%s'", p);
errno = 0;
logerror((char*) errMsg);
}
finalize_it:
return iRet;
}
/* helper to freeSelectors(), used with llExecFunc() to flush
* pending output. -- rgerhards, 2007-08-02
* We do not need to lock the action object here as the processing
* queue is already empty and no other threads are running when
* we call this function. -- rgerhards, 2007-12-12
*/
DEFFUNC_llExecFunc(freeSelectorsActions)
{
action_t *pAction = (action_t*) pData;
assert(pAction != NULL);
/* flush any pending output */
if(pAction->f_prevcount) {
fprintlog(pAction);
}
return RS_RET_OK; /* never fails ;) */
}
/* Close all open log files and free selector descriptor array.
*/
static void freeSelectors(void)
{
selector_t *f;
selector_t *fPrev;
if(Files != NULL) {
dbgprintf("Freeing log structures.\n");
/* just in case, we flush the emergency log. If error messages occur after
* this stage, we loose them, but that's ok. With multi-threading, this can
* never happen. -- rgerhards, 2007-08-03
*/
processImInternal();
/* we first wait until all messages are processed (stopWorker() does
* that. Then, we go one last time over all actions and flush any
* pending "message repeated n times" messages. We must use this sequence
* because otherwise we would flush at whatever message is currently being
* processed without draining the queue. That would lead to invalid
* results. -- rgerhards, 2007-12-12
*/
stopWorker();
for(f = Files ; f != NULL ; f = f->f_next) {
llExecFunc(&f->llActList, freeSelectorsActions, NULL);
}
/* actions flushed and ready for destruction - so do that... */
f = Files;
while (f != NULL) {
fPrev = f;
f = f->f_next;
selectorDestruct(fPrev);
}
/* Reflect the deletion of the selectors linked list. */
Files = NULL;
Initialized = 0;
}
}
/* helper to dbPrintInitInfo, to print out all actions via
* the llExecFunc() facility.
* rgerhards, 2007-08-02
*/
DEFFUNC_llExecFunc(dbgPrintInitInfoAction)
{
DEFiRet;
iRet = actionDbgPrint((action_t*) pData);
printf("\n");
return iRet;
}
/* print debug information as part of init(). This pretty much
* outputs the whole config of rsyslogd. I've moved this code
* out of init() to clean it somewhat up.
* rgerhards, 2007-07-31
*/
static void dbgPrintInitInfo(void)
{
register selector_t *f;
int iSelNbr = 1;
int i;
printf("\nActive selectors:\n");
for (f = Files; f != NULL ; f = f->f_next) {
printf("Selector %d:\n", iSelNbr++);
if(f->pCSProgNameComp != NULL)
printf("tag: '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp));
if(f->eHostnameCmpMode != HN_NO_COMP)
printf("hostname: %s '%s'\n",
f->eHostnameCmpMode == HN_COMP_MATCH ?
"only" : "allbut",
rsCStrGetSzStrNoNULL(f->pCSHostnameComp));
if(f->f_filter_type == FILTER_PRI) {
for (i = 0; i <= LOG_NFACILITIES; i++)
if (f->f_filterData.f_pmask[i] == TABLE_NOPRI)
printf(" X ");
else
printf("%2X ", f->f_filterData.f_pmask[i]);
} else {
printf("PROPERTY-BASED Filter:\n");
printf("\tProperty.: '%s'\n",
rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSPropName));
printf("\tOperation: ");
if(f->f_filterData.prop.isNegated)
printf("NOT ");
printf("'%s'\n", getFIOPName(f->f_filterData.prop.operation));
printf("\tValue....: '%s'\n",
rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSCompValue));
printf("\tAction...: ");
}
printf("\nActions:\n");
llExecFunc(&f->llActList, dbgPrintInitInfoAction, NULL); /* actions */
printf("\n");
}
printf("\n");
if(bDebugPrintTemplateList)
tplPrintList();
if(bDebugPrintModuleList)
modPrintList();
ochPrintList();
if(bDebugPrintCfSysLineHandlerList)
dbgPrintCfSysLineHandlers();
#ifdef SYSLOG_INET
/* now the allowedSender lists: */
PrintAllowedSenders(1); /* UDP */
PrintAllowedSenders(2); /* TCP */
#ifdef USE_GSSAPI
PrintAllowedSenders(3); /* GSS */
#endif
printf("\n");
#endif /* #ifdef SYSLOG_INET */
printf("Messages with malicious PTR DNS Records are %sdropped.\n",
bDropMalPTRMsgs ? "" : "not ");
printf("Control characters are %sreplaced upon reception.\n",
bEscapeCCOnRcv? "" : "not ");
if(bEscapeCCOnRcv)
printf("Control character escape sequence prefix is '%c'.\n",
cCCEscapeChar);
printf("Main queue size %d messages.\n", iMainMsgQueueSize);
}
/* process a configuration file
* started with code from init() by rgerhards on 2007-07-31
*/
static rsRetVal processConfFile(uchar *pConfFile)
{
DEFiRet;
int iLnNbr = 0;
FILE *cf;
selector_t *fCurr = NULL;
uchar *p;
#ifdef CONT_LINE
uchar cbuf[BUFSIZ];
uchar *cline;
#else
uchar cline[BUFSIZ];
#endif
assert(pConfFile != NULL);
if((cf = fopen((char*)pConfFile, "r")) == NULL) {
ABORT_FINALIZE(RS_RET_FOPEN_FAILURE);
}
/* Now process the file.
*/
#if CONT_LINE
cline = cbuf;
while (fgets((char*)cline, sizeof(cbuf) - (cline - cbuf), cf) != NULL) {
#else
while (fgets(cline, sizeof(cline), cf) != NULL) {
#endif
++iLnNbr;
/* drop LF - TODO: make it better, replace fgets(), but its clean as it is */
if(cline[strlen((char*)cline)-1] == '\n') {
cline[strlen((char*)cline) -1] = '\0';
}
/* check for end-of-section, comments, strip off trailing
* spaces and newline character.
*/
p = cline;
skipWhiteSpace(&p);
if (*p == '\0' || *p == '#')
continue;
#if CONT_LINE
strcpy((char*)cline, (char*)p);
#endif
for (p = (uchar*) strchr((char*)cline, '\0'); isspace((int) *--p););
#if CONT_LINE
if (*p == '\\') {
if ((p - cbuf) > BUFSIZ - 30) {
/* Oops the buffer is full - what now? */
cline = cbuf;
} else {
*p = 0;
cline = p;
continue;
}
} else
cline = cbuf;
#endif
*++p = '\0'; // TODO: check this
/* we now have the complete line, and are positioned at the first non-whitespace
* character. So let's process it
*/
#if CONT_LINE
if(cfline(cbuf, &fCurr) != RS_RET_OK) {
#else
if(cfline((uchar*)cline, &fCurr) != RS_RET_OK) {
#endif
/* we log a message, but otherwise ignore the error. After all, the next
* line can be correct. -- rgerhards, 2007-08-02
*/
uchar szErrLoc[MAXFNAME + 64];
dbgprintf("config line NOT successfully processed\n");
snprintf((char*)szErrLoc, sizeof(szErrLoc) / sizeof(uchar),
"%s, line %d", pConfFile, iLnNbr);
logerrorSz("the last error occured in %s", (char*)szErrLoc);
}
}
/* we probably have one selector left to be added - so let's do that now */
CHKiRet(selectorAddList(fCurr));
/* close the configuration file */
(void) fclose(cf);
finalize_it:
if(iRet != RS_RET_OK) {
char errStr[1024];
if(fCurr != NULL)
selectorDestruct(fCurr);
strerror_r(errno, errStr, sizeof(errStr));
dbgprintf("error %d processing config file '%s'; os error (if any): %s\n",
iRet, pConfFile, errStr);
}
return iRet;
}
/* Start the input modules. This function will probably undergo big changes
* while we implement the input module interface. For now, it does the most
* important thing to get at least my poor initial input modules up and
* running. Almost no config option is taken.
* rgerhards, 2007-12-14
*/
static rsRetVal
startInputModules(void)
{
DEFiRet;
modInfo_t *pMod;
/* loop through all modules and activate them (brr...) */
pMod = modGetNxtType(NULL, eMOD_IN);
while(pMod != NULL) {
if((iRet = pMod->mod.im.willRun()) == RS_RET_OK) {
/* activate here */
thrdCreate(pMod->mod.im.runInput, pMod->mod.im.eTermSyncType, pMod->mod.im.afterRun);
} else {
dbgprintf("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet);
}
pMod = modGetNxtType(pMod, eMOD_IN);
}
return RS_RET_OK; /* intentional: we do not care about module errors */
}
/* INIT -- Initialize syslogd from configuration table
* init() is called at initial startup AND each time syslogd is HUPed
*/
static void
init(void)
{
DEFiRet;
#ifdef CONT_LINE
char cbuf[BUFSIZ];
#else
char cline[BUFSIZ];
#endif
char bufStartUpMsg[512];
struct servent *sp;
struct sigaction sigAct;
thrdTerminateAll(); /* stop all running threads - TODO: reconsider location! */
/* initialize some static variables */
pDfltHostnameCmp = NULL;
pDfltProgNameCmp = NULL;
eDfltHostnameCmpMode = HN_NO_COMP;
Forwarding = 0;
#ifdef SYSLOG_INET
if (restart) {
if (pAllowedSenders_UDP != NULL) {
clearAllowedSenders (pAllowedSenders_UDP);
pAllowedSenders_UDP = NULL;
}
if (pAllowedSenders_TCP != NULL) {
clearAllowedSenders (pAllowedSenders_TCP);
pAllowedSenders_TCP = NULL;
}
#ifdef USE_GSSAPI
if (pAllowedSenders_GSS != NULL) {
clearAllowedSenders (pAllowedSenders_GSS);
pAllowedSenders_GSS = NULL;
}
#endif
}
assert(pAllowedSenders_UDP == NULL && pAllowedSenders_TCP == NULL
#ifdef USE_GSSAPI
&& pAllowedSenders_GSS == NULL
#endif
);
#endif
/* I was told by an IPv6 expert that calling getservbyname() seems to be
* still valid, at least for the use case we have. So I re-enabled that
* code. rgerhards, 2007-07-02
*/
if(!strcmp(LogPort, "0")) {
/* we shall use the default syslog/udp port, so let's
* look it up.
* NOTE: getservbyname() is not thread-safe, but this is OK as
* it is called only during init, in single-threading mode.
*/
sp = getservbyname("syslog", "udp");
if (sp == NULL) {
errno = 0;
logerror("Could not find syslog/udp port in /etc/services. "
"Now using IANA-assigned default of 514.");
LogPort = "514";
} else {
/* we can dynamically allocate memory here and do NOT need
* to care about freeing it because even though init() is
* called on each restart, the LogPort can never again be
* "0". So we will only once run into this part of the code
* here. rgerhards, 2007-07-02
* We save ourselfs the hassle of dynamic memory management
* for the very same reason.
*/
static char defPort[8];
snprintf(defPort, sizeof(defPort), "%d", ntohs(sp->s_port));
LogPort = defPort;
}
}
dbgprintf("rsyslog %s.\n", VERSION);
dbgprintf("Called init.\n");
/* Close all open log files and free log descriptor array. This also frees
* all output-modules instance data.
*/
freeSelectors();
/* Unload all non-static modules */
dbgprintf("Unloading non-static modules.\n");
modUnloadAndDestructDynamic();
dbgprintf("Clearing templates.\n");
tplDeleteNew();
if(pMsgQueue != NULL) {
dbgprintf("deleting message queue\n");
queueDelete(pMsgQueue); /* delete fifo here! */
pMsgQueue = NULL;
}
/* re-setting values to defaults (where applicable) */
/* TODO: once we have loadable modules, we must re-visit this code. The reason is
* that config variables are not re-set, because the module is not yet loaded. On
* the other hand, that doesn't matter, because the module got unloaded and is then
* re-loaded, so the variables should be re-set via that way. In any case, we should
* think about the whole situation when we implement loadable plugins.
* rgerhards, 2007-07-31
*/
cfsysline((uchar*)"ResetConfigVariables");
/* open the configuration file */
if((iRet = processConfFile(ConfFile)) != RS_RET_OK) {
/* rgerhards: this code is executed to set defaults when the
* config file could not be opened. We might think about
* abandoning the run in this case - but this, too, is not
* very clever... So we stick with what we have.
* We ignore any errors while doing this - we would be lost anyhow...
*/
selector_t *f = NULL;
char szTTYNameBuf[_POSIX_TTY_NAME_MAX+1]; /* +1 for NULL character */
dbgprintf("primary config file could not be opened - using emergency definitions.\n");
cfline((uchar*)"*.ERR\t" _PATH_CONSOLE, &f);
cfline((uchar*)"*.PANIC\t*", &f);
if(ttyname_r(0, szTTYNameBuf, sizeof(szTTYNameBuf)) == 0) {
snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf);
cfline((uchar*)cbuf, &f);
}
selectorAddList(f);
}
/* we are now done with reading the configuration. This is the right time to
* free some objects that were just needed for loading it. rgerhards 2005-10-19
*/
if(pDfltHostnameCmp != NULL) {
rsCStrDestruct(pDfltHostnameCmp);
pDfltHostnameCmp = NULL;
}
if(pDfltProgNameCmp != NULL) {
rsCStrDestruct(pDfltProgNameCmp);
pDfltProgNameCmp = NULL;
}
#ifdef SYSLOG_INET
/* I have moved initializing UDP sockets before the TCP sockets. This ensures
* they are as soon ready for reception as possible. Of course, it is only a
* very small window of exposure, but it doesn't hurt to limit the message
* loss risk to as low as possible - especially if it costs nothing...
* rgerhards, 2007-06-28
*/
if(Forwarding || AcceptRemote) {
if (finet == NULL) {
if((finet = create_udp_socket()) != NULL)
dbgprintf("Opened %d syslog UDP port(s).\n", *finet);
}
} else {
/* this case can happen during HUP processing. */
closeUDPListenSockets();
}
#endif
/* create message queue */
pMsgQueue = queueInit();
if(pMsgQueue == NULL) {
errno = 0; /* TODO: check if that is possible without threads - I think we must give up... */
logerror("error: could not create message queue - running single-threaded!\n");
}
startWorker();
Initialized = 1;
/* the output part and the queue is now ready to run. So it is a good time
* now to start the inputs. Please note that the net code above should be
* shuffled to down here once we have everything in input modules.
* rgerhards, 2007-12-14
*/
startInputModules();
if(Debug) {
dbgPrintInitInfo();
}
/* we now generate the startup message. It now includes everything to
* identify this instance. -- rgerhards, 2005-08-17
*/
snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char),
" [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
"\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \
"udpPort=\"%s\" tcpReception=\"%s\" tcpPort=\"%s\"]" \
" restart",
(int) myPid,
#ifdef SYSLOG_INET
AcceptRemote ? "Yes" : "No", LogPort,
bEnableTCP ? "Yes" : "No", TCPLstnPort
#else
"No", "0", "No", "0"
#endif /* #ifdef SYSLOG_INET */
);
logmsgInternal(LOG_SYSLOG|LOG_INFO, bufStartUpMsg, ADDDATE);
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = sighup_handler;
sigaction(SIGHUP, &sigAct, NULL);
dbgprintf(" (re)started.\n");
}
/* Helper to cfline() and its helpers. Parses a template name
* from an "action" line. Must be called with the Line pointer
* pointing to the first character after the semicolon.
* rgerhards 2004-11-19
* changed function to work with OMSR. -- rgerhards, 2007-07-27
* the default template is to be used when no template is specified.
*/
rsRetVal cflineParseTemplateName(uchar** pp, omodStringRequest_t *pOMSR, int iEntry, int iTplOpts, uchar *dfltTplName)
{
uchar *p;
uchar *tplName;
DEFiRet;
rsCStrObj *pStrB;
assert(pp != NULL);
assert(*pp != NULL);
assert(pOMSR != NULL);
p =*pp;
/* a template must follow - search it and complain, if not found
*/
skipWhiteSpace(&p);
if(*p == ';')
++p; /* eat it */
else if(*p != '\0' && *p != '#') {
logerror("invalid character in selector line - ';template' expected");
iRet = RS_RET_ERR;
goto finalize_it;
}
skipWhiteSpace(&p); /* go to begin of template name */
if(*p == '\0') {
/* no template specified, use the default */
/* TODO: check NULL ptr */
tplName = (uchar*) strdup((char*)dfltTplName);
} else {
/* template specified, pick it up */
if((pStrB = rsCStrConstruct()) == NULL) {
glblHadMemShortage = 1;
iRet = RS_RET_OUT_OF_MEMORY;
goto finalize_it;
}
/* now copy the string */
while(*p && *p != '#' && !isspace((int) *p)) {
CHKiRet(rsCStrAppendChar(pStrB, *p));
++p;
}
CHKiRet(rsCStrFinish(pStrB));
CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, &tplName, 0));
}
iRet = OMSRsetEntry(pOMSR, iEntry, tplName, iTplOpts);
if(iRet != RS_RET_OK) goto finalize_it;
finalize_it:
*pp = p;
return iRet;
}
/* Helper to cfline(). Parses a file name up until the first
* comma and then looks for the template specifier. Tries
* to find that template.
* rgerhards 2004-11-18
* parameter pFileName must point to a buffer large enough
* to hold the largest possible filename.
* rgerhards, 2007-07-25
* updated to include OMSR pointer -- rgerhards, 2007-07-27
*/
rsRetVal cflineParseFileName(uchar* p, uchar *pFileName, omodStringRequest_t *pOMSR, int iEntry, int iTplOpts)
{
register uchar *pName;
int i;
DEFiRet;
assert(pOMSR != NULL);
pName = pFileName;
i = 1; /* we start at 1 so that we reseve space for the '\0'! */
while(*p && *p != ';' && i < MAXFNAME) {
*pName++ = *p++;
++i;
}
*pName = '\0';
iRet = cflineParseTemplateName(&p, pOMSR, iEntry, iTplOpts, (uchar*) " TradFmt");
return iRet;
}
/*
* Helper to cfline(). This function takes the filter part of a traditional, PRI
* based line and decodes the PRIs given in the selector line. It processed the
* line up to the beginning of the action part. A pointer to that beginnig is
* passed back to the caller.
* rgerhards 2005-09-15
*/
static rsRetVal cflineProcessTradPRIFilter(uchar **pline, register selector_t *f)
{
uchar *p;
register uchar *q;
register int i, i2;
uchar *bp;
int pri;
int singlpri = 0;
int ignorepri = 0;
uchar buf[MAXLINE];
uchar xbuf[200];
assert(pline != NULL);
assert(*pline != NULL);
assert(f != NULL);
dbgprintf(" - traditional PRI filter\n");
errno = 0; /* keep strerror_r() stuff out of logerror messages */
f->f_filter_type = FILTER_PRI;
/* Note: file structure is pre-initialized to zero because it was
* created with calloc()!
*/
for (i = 0; i <= LOG_NFACILITIES; i++) {
f->f_filterData.f_pmask[i] = TABLE_NOPRI;
}
/* scan through the list of selectors */
for (p = *pline; *p && *p != '\t' && *p != ' ';) {
/* find the end of this facility name list */
for (q = p; *q && *q != '\t' && *q++ != '.'; )
continue;
/* collect priority name */
for (bp = buf; *q && !strchr("\t ,;", *q); )
*bp++ = *q++;
*bp = '\0';
/* skip cruft */
while (strchr(",;", *q))
q++;
/* decode priority name */
if ( *buf == '!' ) {
ignorepri = 1;
for (bp=buf; *(bp+1); bp++)
*bp=*(bp+1);
*bp='\0';
}
else {
ignorepri = 0;
}
if ( *buf == '=' )
{
singlpri = 1;
pri = decode(&buf[1], PriNames);
}
else {
singlpri = 0;
pri = decode(buf, PriNames);
}
if (pri < 0) {
snprintf((char*) xbuf, sizeof(xbuf), "unknown priority name \"%s\"", buf);
logerror((char*) xbuf);
return RS_RET_ERR;
}
/* scan facilities */
while (*p && !strchr("\t .;", *p)) {
for (bp = buf; *p && !strchr("\t ,;.", *p); )
*bp++ = *p++;
*bp = '\0';
if (*buf == '*') {
for (i = 0; i <= LOG_NFACILITIES; i++) {
if ( pri == INTERNAL_NOPRI ) {
if ( ignorepri )
f->f_filterData.f_pmask[i] = TABLE_ALLPRI;
else
f->f_filterData.f_pmask[i] = TABLE_NOPRI;
}
else if ( singlpri ) {
if ( ignorepri )
f->f_filterData.f_pmask[i] &= ~(1<<pri);
else
f->f_filterData.f_pmask[i] |= (1<<pri);
}
else
{
if ( pri == TABLE_ALLPRI ) {
if ( ignorepri )
f->f_filterData.f_pmask[i] = TABLE_NOPRI;
else
f->f_filterData.f_pmask[i] = TABLE_ALLPRI;
}
else
{
if ( ignorepri )
for (i2= 0; i2 <= pri; ++i2)
f->f_filterData.f_pmask[i] &= ~(1<<i2);
else
for (i2= 0; i2 <= pri; ++i2)
f->f_filterData.f_pmask[i] |= (1<<i2);
}
}
}
} else {
i = decode(buf, FacNames);
if (i < 0) {
snprintf((char*) xbuf, sizeof(xbuf), "unknown facility name \"%s\"", buf);
logerror((char*) xbuf);
return RS_RET_ERR;
}
if ( pri == INTERNAL_NOPRI ) {
if ( ignorepri )
f->f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI;
else
f->f_filterData.f_pmask[i >> 3] = TABLE_NOPRI;
} else if ( singlpri ) {
if ( ignorepri )
f->f_filterData.f_pmask[i >> 3] &= ~(1<<pri);
else
f->f_filterData.f_pmask[i >> 3] |= (1<<pri);
} else {
if ( pri == TABLE_ALLPRI ) {
if ( ignorepri )
f->f_filterData.f_pmask[i >> 3] = TABLE_NOPRI;
else
f->f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI;
} else {
if ( ignorepri )
for (i2= 0; i2 <= pri; ++i2)
f->f_filterData.f_pmask[i >> 3] &= ~(1<<i2);
else
for (i2= 0; i2 <= pri; ++i2)
f->f_filterData.f_pmask[i >> 3] |= (1<<i2);
}
}
}
while (*p == ',' || *p == ' ')
p++;
}
p = q;
}
/* skip to action part */
while (*p == '\t' || *p == ' ')
p++;
*pline = p;
return RS_RET_OK;
}
/*
* Helper to cfline(). This function takes the filter part of a property
* based filter and decodes it. It processes the line up to the beginning
* of the action part. A pointer to that beginnig is passed back to the caller.
* rgerhards 2005-09-15
*/
static rsRetVal cflineProcessPropFilter(uchar **pline, register selector_t *f)
{
rsParsObj *pPars;
rsCStrObj *pCSCompOp;
rsRetVal iRet;
int iOffset; /* for compare operations */
assert(pline != NULL);
assert(*pline != NULL);
assert(f != NULL);
dbgprintf(" - property-based filter\n");
errno = 0; /* keep strerror_r() stuff out of logerror messages */
f->f_filter_type = FILTER_PROP;
/* create parser object starting with line string without leading colon */
if((iRet = rsParsConstructFromSz(&pPars, (*pline)+1)) != RS_RET_OK) {
logerrorInt("Error %d constructing parser object - ignoring selector", iRet);
return(iRet);
}
/* read property */
iRet = parsDelimCStr(pPars, &f->f_filterData.prop.pCSPropName, ',', 1, 1);
if(iRet != RS_RET_OK) {
logerrorInt("error %d parsing filter property - ignoring selector", iRet);
rsParsDestruct(pPars);
return(iRet);
}
/* read operation */
iRet = parsDelimCStr(pPars, &pCSCompOp, ',', 1, 1);
if(iRet != RS_RET_OK) {
logerrorInt("error %d compare operation property - ignoring selector", iRet);
rsParsDestruct(pPars);
return(iRet);
}
/* we now first check if the condition is to be negated. To do so, we first
* must make sure we have at least one char in the param and then check the
* first one.
* rgerhards, 2005-09-26
*/
if(rsCStrLen(pCSCompOp) > 0) {
if(*rsCStrGetBufBeg(pCSCompOp) == '!') {
f->f_filterData.prop.isNegated = 1;
iOffset = 1; /* ignore '!' */
} else {
f->f_filterData.prop.isNegated = 0;
iOffset = 0;
}
} else {
f->f_filterData.prop.isNegated = 0;
iOffset = 0;
}
if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "contains", 8)) {
f->f_filterData.prop.operation = FIOP_CONTAINS;
} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "isequal", 7)) {
f->f_filterData.prop.operation = FIOP_ISEQUAL;
} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "startswith", 10)) {
f->f_filterData.prop.operation = FIOP_STARTSWITH;
} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (unsigned char*) "regex", 5)) {
f->f_filterData.prop.operation = FIOP_REGEX;
} else {
logerrorSz("error: invalid compare operation '%s' - ignoring selector",
(char*) rsCStrGetSzStrNoNULL(pCSCompOp));
}
rsCStrDestruct (pCSCompOp); /* no longer needed */
/* read compare value */
iRet = parsQuotedCStr(pPars, &f->f_filterData.prop.pCSCompValue);
if(iRet != RS_RET_OK) {
logerrorInt("error %d compare value property - ignoring selector", iRet);
rsParsDestruct(pPars);
return(iRet);
}
/* skip to action part */
if((iRet = parsSkipWhitespace(pPars)) != RS_RET_OK) {
logerrorInt("error %d skipping to action part - ignoring selector", iRet);
rsParsDestruct(pPars);
return(iRet);
}
/* cleanup */
*pline = *pline + rsParsGetParsePointer(pPars) + 1;
/* we are adding one for the skipped initial ":" */
return rsParsDestruct(pPars);
}
/*
* Helper to cfline(). This function interprets a BSD host selector line
* from the config file ("+/-hostname"). It stores it for further reference.
* rgerhards 2005-10-19
*/
static rsRetVal cflineProcessHostSelector(uchar **pline)
{
rsRetVal iRet;
assert(pline != NULL);
assert(*pline != NULL);
assert(**pline == '-' || **pline == '+');
dbgprintf(" - host selector line\n");
/* check include/exclude setting */
if(**pline == '+') {
eDfltHostnameCmpMode = HN_COMP_MATCH;
} else { /* we do not check for '-', it must be, else we wouldn't be here */
eDfltHostnameCmpMode = HN_COMP_NOMATCH;
}
(*pline)++; /* eat + or - */
/* the below is somewhat of a quick hack, but it is efficient (this is
* why it is in here. "+*" resets the tag selector with BSD syslog. We mimic
* this, too. As it is easy to check that condition, we do not fire up a
* parser process, just make sure we do not address beyond our space.
* Order of conditions in the if-statement is vital! rgerhards 2005-10-18
*/
if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') {
dbgprintf("resetting BSD-like hostname filter\n");
eDfltHostnameCmpMode = HN_NO_COMP;
if(pDfltHostnameCmp != NULL) {
if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, NULL)) != RS_RET_OK)
return(iRet);
}
} else {
dbgprintf("setting BSD-like hostname filter to '%s'\n", *pline);
if(pDfltHostnameCmp == NULL) {
/* create string for parser */
if((iRet = rsCStrConstructFromszStr(&pDfltHostnameCmp, *pline)) != RS_RET_OK)
return(iRet);
} else { /* string objects exists, just update... */
if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, *pline)) != RS_RET_OK)
return(iRet);
}
}
return RS_RET_OK;
}
/*
* Helper to cfline(). This function interprets a BSD tag selector line
* from the config file ("!tagname"). It stores it for further reference.
* rgerhards 2005-10-18
*/
static rsRetVal cflineProcessTagSelector(uchar **pline)
{
rsRetVal iRet;
assert(pline != NULL);
assert(*pline != NULL);
assert(**pline == '!');
dbgprintf(" - programname selector line\n");
(*pline)++; /* eat '!' */
/* the below is somewhat of a quick hack, but it is efficient (this is
* why it is in here. "!*" resets the tag selector with BSD syslog. We mimic
* this, too. As it is easy to check that condition, we do not fire up a
* parser process, just make sure we do not address beyond our space.
* Order of conditions in the if-statement is vital! rgerhards 2005-10-18
*/
if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') {
dbgprintf("resetting programname filter\n");
if(pDfltProgNameCmp != NULL) {
if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, NULL)) != RS_RET_OK)
return(iRet);
}
} else {
dbgprintf("setting programname filter to '%s'\n", *pline);
if(pDfltProgNameCmp == NULL) {
/* create string for parser */
if((iRet = rsCStrConstructFromszStr(&pDfltProgNameCmp, *pline)) != RS_RET_OK)
return(iRet);
} else { /* string objects exists, just update... */
if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, *pline)) != RS_RET_OK)
return(iRet);
}
}
return RS_RET_OK;
}
/* add an Action to the current selector
* The pOMSR is freed, as it is not needed after this function.
* Note: this function pulls global data that specifies action config state.
* rgerhards, 2007-07-27
*/
rsRetVal addAction(action_t **ppAction, modInfo_t *pMod, void *pModData, omodStringRequest_t *pOMSR, int bSuspended)
{
DEFiRet;
int i;
int iTplOpts;
uchar *pTplName;
action_t *pAction;
char errMsg[512];
assert(ppAction != NULL);
assert(pMod != NULL);
assert(pOMSR != NULL);
dbgprintf("Module %s processed this config line.\n", modGetName(pMod));
CHKiRet(actionConstruct(&pAction)); /* create action object first */
pAction->pMod = pMod;
pAction->pModData = pModData;
pAction->bExecWhenPrevSusp = bActExecWhenPrevSusp;
/* check if we can obtain the template pointers - TODO: move to separat function? */
pAction->iNumTpls = OMSRgetEntryCount(pOMSR);
assert(pAction->iNumTpls >= 0); /* only debug check because this "can not happen" */
/* please note: iNumTpls may validly be zero. This is the case if the module
* does not request any templates. This sounds unlikely, but an actual example is
* the discard action, which does not require a string. -- rgerhards, 2007-07-30
*/
if(pAction->iNumTpls > 0) {
/* we first need to create the template pointer array */
if((pAction->ppTpl = calloc(pAction->iNumTpls, sizeof(struct template *))) == NULL) {
glblHadMemShortage = 1;
ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY);
}
/* and now the array for doAction() message pointers */
if((pAction->ppMsgs = calloc(pAction->iNumTpls, sizeof(uchar *))) == NULL) {
glblHadMemShortage = 1;
ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY);
}
}
for(i = 0 ; i < pAction->iNumTpls ; ++i) {
CHKiRet(OMSRgetEntry(pOMSR, i, &pTplName, &iTplOpts));
/* Ok, we got everything, so it now is time to look up the
* template (Hint: templates MUST be defined before they are
* used!)
*/
if((pAction->ppTpl[i] = tplFind((char*)pTplName, strlen((char*)pTplName))) == NULL) {
snprintf(errMsg, sizeof(errMsg) / sizeof(char),
" Could not find template '%s' - action disabled\n",
pTplName);
errno = 0;
logerror(errMsg);
ABORT_FINALIZE(RS_RET_NOT_FOUND);
}
/* check required template options */
if( (iTplOpts & OMSR_RQD_TPL_OPT_SQL)
&& (pAction->ppTpl[i]->optFormatForSQL == 0)) {
errno = 0;
logerror("Action disabled. To use this action, you have to specify "
"the SQL or stdSQL option in your template!\n");
ABORT_FINALIZE(RS_RET_RQD_TPLOPT_MISSING);
}
dbgprintf("template: '%s' assigned\n", pTplName);
}
pAction->pMod = pMod;
pAction->pModData = pModData;
/* now check if the module is compatible with select features */
if(pMod->isCompatibleWithFeature(sFEATURERepeatedMsgReduction) == RS_RET_OK)
pAction->f_ReduceRepeated = bReduceRepeatMsgs;
else {
dbgprintf("module is incompatible with RepeatedMsgReduction - turned off\n");
pAction->f_ReduceRepeated = 0;
}
pAction->bEnabled = 1; /* action is enabled */
if(bSuspended)
actionSuspend(pAction);
*ppAction = pAction; /* finally store the action pointer */
finalize_it:
if(iRet == RS_RET_OK)
iRet = OMSRdestruct(pOMSR);
else {
/* do not overwrite error state! */
OMSRdestruct(pOMSR);
if(pAction != NULL)
actionDestruct(pAction);
}
return iRet;
}
/* read the filter part of a configuration line and store the filter
* in the supplied selector_t
* rgerhards, 2007-08-01
*/
static rsRetVal cflineDoFilter(uchar **pp, selector_t *f)
{
DEFiRet;
assert(pp != NULL);
assert(f != NULL);
/* check which filter we need to pull... */
switch(**pp) {
case ':':
iRet = cflineProcessPropFilter(pp, f);
break;
default:
iRet = cflineProcessTradPRIFilter(pp, f);
break;
}
/* we now check if there are some global (BSD-style) filter conditions
* and, if so, we copy them over. rgerhards, 2005-10-18
*/
if(pDfltProgNameCmp != NULL)
if((iRet = rsCStrConstructFromCStr(&(f->pCSProgNameComp), pDfltProgNameCmp)) != RS_RET_OK)
return(iRet);
if(eDfltHostnameCmpMode != HN_NO_COMP) {
f->eHostnameCmpMode = eDfltHostnameCmpMode;
if((iRet = rsCStrConstructFromCStr(&(f->pCSHostnameComp), pDfltHostnameCmp)) != RS_RET_OK)
return(iRet);
}
return iRet;
}
/* process the action part of a selector line
* rgerhards, 2007-08-01
*/
static rsRetVal cflineDoAction(uchar **p, action_t **ppAction)
{
DEFiRet;
modInfo_t *pMod;
omodStringRequest_t *pOMSR;
action_t *pAction;
void *pModData;
assert(p != NULL);
assert(ppAction != NULL);
/* loop through all modules and see if one picks up the line */
pMod = modGetNxtType(NULL, eMOD_OUT);
while(pMod != NULL) {
iRet = pMod->mod.om.parseSelectorAct(p, &pModData, &pOMSR);
dbgprintf("tried selector action for %s: %d\n", modGetName(pMod), iRet);
if(iRet == RS_RET_OK || iRet == RS_RET_SUSPENDED) {
if((iRet = addAction(&pAction, pMod, pModData, pOMSR, (iRet == RS_RET_SUSPENDED)? 1 : 0)) == RS_RET_OK) {
/* now check if the module is compatible with select features */
if(pMod->isCompatibleWithFeature(sFEATURERepeatedMsgReduction) == RS_RET_OK)
pAction->f_ReduceRepeated = bReduceRepeatMsgs;
else {
dbgprintf("module is incompatible with RepeatedMsgReduction - turned off\n");
pAction->f_ReduceRepeated = 0;
}
pAction->bEnabled = 1; /* action is enabled */
}
break;
}
else if(iRet != RS_RET_CONFLINE_UNPROCESSED) {
/* In this case, the module would have handled the config
* line, but some error occured while doing so. This error should
* already by reported by the module. We do not try any other
* modules on this line, because we found the right one.
* rgerhards, 2007-07-24
*/
dbgprintf("error %d parsing config line\n", (int) iRet);
break;
}
pMod = modGetNxtType(pMod, eMOD_OUT);
}
*ppAction = pAction;
return iRet;
}
/* helper to selectorAddListCheckActions()
* This is the fucntion to be executed by llExecFunc
*/
DEFFUNC_llExecFunc(selectorAddListCheckActionsChecker)
{
DEFiRet;
action_t *pAction = (action_t *) pData;
assert(pAction != NULL);
if(pAction->pMod->needUDPSocket(pAction->pModData) == RS_RET_TRUE) {
Forwarding++;
}
return iRet;
}
/* loop through a list of actions and perform necessary checks and
* housekeeping. This function must only be called when the owning
* selector_t looks valid and is not likely to be discarded. However,
* if we do not return RS_RET_OK, the caller MUST discard the
* owning selector_t. -- rgerhards, 2007-08-02
*/
static rsRetVal selectorAddListCheckActions(selector_t *f)
{
DEFiRet;
assert(f != NULL);
CHKiRet(llExecFunc(&f->llActList, selectorAddListCheckActionsChecker, NULL));
finalize_it:
return iRet;
}
/* add a completely-processed selector (after config line parsing) to
* the linked list of selectors. We now need to check
* if it has any actions associated and, if so, link it to the linked
* list. If it has nothing associated with it, we can simply discard
* it.
* We have one special case during initialization: then, the current
* selector is NULL, which means we do not need to care about it at
* all. -- rgerhards, 2007-08-01
*/
static rsRetVal selectorAddList(selector_t *f)
{
DEFiRet;
int iActionCnt;
static selector_t *nextp = NULL; /* TODO: make this go away (see comment below) */
if(f != NULL) {
CHKiRet(llGetNumElts(&f->llActList, &iActionCnt));
if(iActionCnt == 0) {
logerror("warning: selector line without actions will be discarded");
selectorDestruct(f);
} else {
if((iRet = selectorAddListCheckActions(f)) != RS_RET_OK) {
logerror("selector line will be discarded due to error in action(s)");
selectorDestruct(f);
goto finalize_it;
}
/* successfully created an entry */
dbgprintf("selector line successfully processed\n");
/* TODO: we should use the linked list class for the selector list, else we need to add globals
* ... well nextp could be added temporarily...
* Thanks to varmojfekoj for having the idea to just use "Files" to make this
* code work. I had actually forgotten to fix the code here before moving to 1.18.0.
* And, of course, I also did not migrate the selector_t structure to the linked list class.
* However, that should still be one of the very next things to happen.
* rgerhards, 2007-08-06
*/
if(Files == NULL) {
Files = f;
} else {
nextp->f_next = f;
}
nextp = f;
}
}
finalize_it:
return iRet;
}
/* Process a configuration file line in traditional "filter selector" format
*/
static rsRetVal cflineClassic(uchar *p, selector_t **pfCurr)
{
DEFiRet;
action_t *pAction;
selector_t *fCurr;
assert(pfCurr != NULL);
fCurr = *pfCurr;
/* lines starting with '&' have no new filters and just add
* new actions to the currently processed selector.
*/
if(*p == '&') {
++p; /* eat '&' */
skipWhiteSpace(&p); /* on to command */
} else {
/* we are finished with the current selector. So we now need to check
* if it has any actions associated and, if so, link it to the linked
* list. If it has nothing associated with it, we can simply discard
* it. In any case, we create a fresh selector for our new filter.
* We have one special case during initialization: then, the current
* selector is NULL, which means we do not need to care about it at
* all. -- rgerhards, 2007-08-01
*/
CHKiRet(selectorAddList(fCurr));
CHKiRet(selectorConstruct(&fCurr)); /* create "fresh" selector */
CHKiRet(cflineDoFilter(&p, fCurr)); /* pull filters */
}
CHKiRet(cflineDoAction(&p, &pAction));
CHKiRet(llAppend(&fCurr->llActList, NULL, (void*) pAction));
finalize_it:
*pfCurr = fCurr;
return iRet;
}
/* process a configuration line
* I re-did this functon because it was desperately time to do so
* rgerhards, 2007-08-01
*/
static rsRetVal cfline(uchar *line, selector_t **pfCurr)
{
DEFiRet;
assert(line != NULL);
dbgprintf("cfline: '%s'\n", line);
/* check type of line and call respective processing */
switch(*line) {
case '!':
iRet = cflineProcessTagSelector(&line);
break;
case '+':
case '-':
iRet = cflineProcessHostSelector(&line);
break;
case '$':
++line; /* eat '$' */
iRet = cfsysline(line);
break;
default:
iRet = cflineClassic(line, pfCurr);
break;
}
return iRet;
}
/* Decode a symbolic name to a numeric value
*/
int decode(uchar *name, struct code *codetab)
{
register struct code *c;
register uchar *p;
uchar buf[80];
assert(name != NULL);
assert(codetab != NULL);
dbgprintf("symbolic name: %s", name);
if (isdigit((int) *name))
{
dbgprintf("\n");
return (atoi((char*) name));
}
strncpy((char*) buf, (char*) name, 79);
for (p = buf; *p; p++)
if (isupper((int) *p))
*p = tolower((int) *p);
for (c = codetab; c->c_name; c++)
if (!strcmp((char*) buf, (char*) c->c_name))
{
dbgprintf(" ==> %d\n", c->c_val);
return (c->c_val);
}
return (-1);
}
extern void dbgprintf(char *fmt, ...) __attribute__((format(printf,1, 2)));
void
dbgprintf(char *fmt, ...)
{
static int bWasNL = FALSE;
va_list ap;
if ( !(Debug && debugging_on) )
return;
/* The bWasNL handler does not really work. It works if no thread
* switching occurs during non-NL messages. Else, things are messed
* up. Anyhow, it works well enough to provide useful help during
* getting this up and running. It is questionable if the extra effort
* is worth fixing it, giving the limited appliability.
* rgerhards, 2005-10-25
* I have decided that it is not worth fixing it - especially as it works
* pretty well.
* rgerhards, 2007-06-15
*/
if(bWasNL) {
fprintf(stdout, "%8.8x: ", (unsigned int) pthread_self());
}
bWasNL = (*(fmt + strlen(fmt) - 1) == '\n') ? TRUE : FALSE;
va_start(ap, fmt);
vfprintf(stdout, fmt, ap);
va_end(ap);
fflush(stdout);
return;
}
/*
* The following function is resposible for handling a SIGHUP signal. Since
* we are now doing mallocs/free as part of init we had better not being
* doing this during a signal handler. Instead this function simply sets
* a flag variable which will tell the main loop to go through a restart.
*/
void sighup_handler()
{
struct sigaction sigAct;
restart = 1;
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = sighup_handler;
sigaction(SIGHUP, &sigAct, NULL);
return;
}
/**
* getSubString
*
* Copy a string byte by byte until the occurrence
* of a given separator.
*
* \param ppSrc Pointer to a pointer of the source array of characters. If a
separator detected the Pointer points to the next char after the
separator. Except if the end of the string is dedected ('\n').
Then it points to the terminator char.
* \param pDst Pointer to the destination array of characters. Here the substing
will be stored.
* \param DstSize Maximum numbers of characters to store.
* \param cSep Separator char.
* \ret int Returns 0 if no error occured.
*/
int getSubString(uchar **ppSrc, char *pDst, size_t DstSize, char cSep)
{
uchar *pSrc = *ppSrc;
int iErr = 0; /* 0 = no error, >0 = error */
while(*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0' && DstSize>1) {
*pDst++ = *(pSrc)++;
DstSize--;
}
/* check if the Dst buffer was to small */
if (*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0')
{
dbgprintf("in getSubString, error Src buffer > Dst buffer\n");
iErr = 1;
}
if (*pSrc == '\0' || *pSrc == '\n')
/* this line was missing, causing ppSrc to be invalid when it
* was returned in case of end-of-string. rgerhards 2005-07-29
*/
*ppSrc = pSrc;
else
*ppSrc = pSrc+1;
*pDst = '\0';
return iErr;
}
/* print out which socket we are listening on. This is only
* a debug aid. rgerhards, 2007-07-02
*/
void debugListenInfo(int fd, char *type)
{
char *szFamily;
int port;
struct sockaddr sa;
struct sockaddr_in *ipv4;
struct sockaddr_in6 *ipv6;
socklen_t saLen = sizeof(sa);
if(getsockname(fd, &sa, &saLen) == 0) {
switch(sa.sa_family) {
case PF_INET:
szFamily = "IPv4";
ipv4 = (struct sockaddr_in*) &sa;
port = ntohs(ipv4->sin_port);
break;
case PF_INET6:
szFamily = "IPv6";
ipv6 = (struct sockaddr_in6*) &sa;
port = ntohs(ipv6->sin6_port);
break;
default:
szFamily = "other";
port = -1;
break;
}
dbgprintf("Listening on %s syslogd socket %d (%s/port %d).\n",
type, fd, szFamily, port);
return;
}
/* we can not obtain peer info. We are just providing
* debug info, so this is no reason to break the program
* or do any serious error reporting.
*/
dbgprintf("Listening on syslogd socket %d - could not obtain peer info.\n", fd);
}
/* this function pulls all internal messages from the buffer
* and puts them into the processing engine.
* We can only do limited error handling, as this would not
* really help us. TODO: add error messages?
* rgerhards, 2007-08-03
*/
static void processImInternal(void)
{
int iPri;
int iFlags;
msg_t *pMsg;
while(iminternalRemoveMsg(&iPri, &pMsg, &iFlags) == RS_RET_OK) {
logmsg(iPri, pMsg, iFlags);
}
}
/* process the select() selector array after the successful select.
* processing is completed as soon as all selectors needing attention
* are processed.
* rgerhards, 2007-08-08
*/
static rsRetVal processSelectAfter(int maxfds, int nfds, fd_set *pReadfds)
{
DEFiRet;
int i;
char line[MAXLINE +1];
#ifdef SYSLOG_INET
struct sockaddr_storage frominet;
socklen_t socklen;
uchar fromHost[NI_MAXHOST];
uchar fromHostFQDN[NI_MAXHOST];
int iTCPSess;
ssize_t l;
#endif /* #ifdef SYSLOG_INET */
/* the following macro is used to decrement the number of to-be-probed
* fds and abort this function when we are done with all.
*/
# define FDPROCESSED() if(--nfds == 0) { ABORT_FINALIZE(RS_RET_OK); }
if (nfds < 0) {
if (errno != EINTR)
logerror("select");
dbgprintf("Select interrupted.\n");
ABORT_FINALIZE(RS_RET_OK); /* we are done in any case */
}
if(debugging_on) {
dbgprintf("\nSuccessful select, descriptor count = %d, Activity on: ", nfds);
for (i = 0; i <= maxfds; ++i)
if ( FD_ISSET(i, pReadfds) )
dbgprintf("%d ", i);
dbgprintf(("\n"));
}
#ifdef SYSLOG_INET
if (finet != NULL && AcceptRemote) {
for (i = 0; i < *finet; i++) {
if (FD_ISSET(finet[i+1], pReadfds)) {
socklen = sizeof(frominet);
memset(line, 0xff, sizeof(line)); // TODO: I think we need this for debug only - remove after bug hunt
l = recvfrom(finet[i+1], line, MAXLINE - 1, 0,
(struct sockaddr *)&frominet, &socklen);
if (l > 0) {
if(cvthname(&frominet, fromHost, fromHostFQDN) == RS_RET_OK) {
dbgprintf("Message from inetd socket: #%d, host: %s\n",
finet[i+1], fromHost);
/* Here we check if a host is permitted to send us
* syslog messages. If it isn't, we do not further
* process the message but log a warning (if we are
* configured to do this).
* rgerhards, 2005-09-26
*/
if(isAllowedSender(pAllowedSenders_UDP,
(struct sockaddr *)&frominet, (char*)fromHostFQDN)) {
printchopped((char*)fromHost, line, l, finet[i+1], 1);
} else {
dbgprintf("%s is not an allowed sender\n", (char*)fromHostFQDN);
if(option_DisallowWarning) {
logerrorSz("UDP message from disallowed sender %s discarded",
(char*)fromHost);
}
}
}
} else if (l < 0 && errno != EINTR && errno != EAGAIN) {
char errStr[1024];
strerror_r(errno, errStr, sizeof(errStr));
dbgprintf("INET socket error: %d = %s.\n", errno, errStr);
logerror("recvfrom inet");
/* should be harmless */
sleep(1);
}
FDPROCESSED();
}
}
}
#endif
finalize_it:
return iRet;
}
/* This is the main processing loop. It is called after successful initialization.
* When it returns, the syslogd terminates.
*/
static void mainloop(void)
{
fd_set readfds;
int i;
int maxfds;
int nfds;
#ifdef SYSLOG_INET
int iTCPSess;
#endif /* #ifdef SYSLOG_INET */
while(!bFinished){
errno = 0;
maxfds = 0;
FD_ZERO (&readfds);
/* first check if we have any internal messages queued and spit them out */
processImInternal();
#ifdef SYSLOG_INET
/* Add the UDP listen sockets to the list of read descriptors.
*/
if(finet != NULL && AcceptRemote) {
for (i = 0; i < *finet; i++) {
if (finet[i+1] != -1) {
if(Debug)
debugListenInfo(finet[i+1], "UDP");
FD_SET(finet[i+1], &readfds);
if(finet[i+1]>maxfds) maxfds=finet[i+1];
}
}
}
#endif
if ( debugging_on ) {
dbgprintf("----------------------------------------\n");
dbgprintf("Calling select, active file descriptors (max %d): ", maxfds);
for (nfds= 0; nfds <= maxfds; ++nfds)
if ( FD_ISSET(nfds, &readfds) )
dbgprintf("%d ", nfds);
dbgprintf("\n");
}
nfds = select(maxfds+1, (fd_set *) &readfds, NULL, NULL, NULL);
if(bRequestDoMark) {
domark();
bRequestDoMark = 0;
/* We do not use continue, because domark() is carried out
* only when something else happened.
*/
}
if(restart) {
dbgprintf("\nReceived SIGHUP, reloading rsyslogd.\n");
/* worker thread is stopped as part of init() */
init();
restart = 0;
continue;
}
if (nfds == 0) {
dbgprintf("No select activity.\n");
continue;
}
processSelectAfter(maxfds, nfds, &readfds);
}
}
/* If user is not root, prints warnings or even exits
* TODO: check all dynafiles for write permission
* ... but it is probably better to wait here until we have
* a module interface - rgerhards, 2007-07-23
*/
static void checkPermissions()
{
/* we are not root */
if (geteuid() != 0)
{
fputs("WARNING: Local messages will not be logged! If you want to log them, run rsyslog as root.\n",stderr);
#ifdef SYSLOG_INET
/* udp enabled and port number less than or equal to 1024 */
if ( AcceptRemote && (atoi(LogPort) <= 1024) )
fprintf(stderr, "WARNING: Will not listen on UDP port %s. Use port number higher than 1024 or run rsyslog as root!\n", LogPort);
/* tcp enabled and port number less or equal to 1024 */
if( bEnableTCP && (atoi(TCPLstnPort) <= 1024) )
fprintf(stderr, "WARNING: Will not listen on TCP port %s. Use port number higher than 1024 or run rsyslog as root!\n", TCPLstnPort);
/* Neither explicit high UDP port nor explicit high TCP port.
* It is useless to run anymore */
if( !(AcceptRemote && (atoi(LogPort) > 1024)) && !( bEnableTCP && (atoi(TCPLstnPort) > 1024)) )
{
#endif
fprintf(stderr, "ERROR: Nothing to log, no reason to run. Please run rsyslog as root.\n");
exit(EXIT_FAILURE);
#ifdef SYSLOG_INET
}
#endif
}
}
/* load build-in modules
* very first version begun on 2007-07-23 by rgerhards
*/
static rsRetVal loadBuildInModules(void)
{
DEFiRet;
if((iRet = doModInit(modInitFile, (uchar*) "builtin-file", NULL)) != RS_RET_OK)
return iRet;
#ifdef SYSLOG_INET
if((iRet = doModInit(modInitFwd, (uchar*) "builtin-fwd", NULL)) != RS_RET_OK)
return iRet;
#endif
if((iRet = doModInit(modInitShell, (uchar*) "builtin-shell", NULL)) != RS_RET_OK)
return iRet;
if((iRet = doModInit(modInitDiscard, (uchar*) "builtin-discard", NULL)) != RS_RET_OK)
return iRet;
/* dirty, but this must be for the time being: the usrmsg module must always be
* loaded as last module. This is because it processes any time of action selector.
* If we load it before other modules, these others will never have a chance of
* working with the config file. We may change that implementation so that a user name
* must start with an alnum, that would definitely help (but would it break backwards
* compatibility?). * rgerhards, 2007-07-23
* User names now must begin with:
* [a-zA-Z0-9_.]
*/
if((iRet = doModInit(modInitUsrMsg, (uchar*) "builtin-usrmsg", NULL)) != RS_RET_OK)
return iRet;
/* ok, initialization of the command handler probably does not 100% belong right in
* this space here. However, with the current design, this is actually quite a good
* place to put it. We might decide to shuffle it around later, but for the time
* being, the code has found its home here. A not-just-sideeffect of this decision
* is that rsyslog will terminate if we can not register our built-in config commands.
* This, I think, is the right thing to do. -- rgerhards, 2007-07-31
*/
CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesize", 0, eCmdHdlrInt, NULL, &iMainMsgQueueSize, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgreduction", 0, eCmdHdlrBinary, NULL, &bReduceRepeatMsgs, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlywhenpreviousissuspended", 0, eCmdHdlrBinary, NULL, &bActExecWhenPrevSusp, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeinterval", 0, eCmdHdlrInt, setActionResumeInterval, NULL, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"controlcharacterescapeprefix", 0, eCmdHdlrGetChar, NULL, &cCCEscapeChar, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"escapecontrolcharactersonreceive", 0, eCmdHdlrBinary, NULL, &bEscapeCCOnRcv, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"dropmsgswithmaliciousdnsptrrecords", 0, eCmdHdlrBinary, NULL, &bDropMalPTRMsgs, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"droptrailinglfonreception", 0, eCmdHdlrBinary, NULL, &bDropTrailingLF, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"template", 0, eCmdHdlrCustomHandler, doNameLine, (void*)DIR_TEMPLATE, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"outchannel", 0, eCmdHdlrCustomHandler, doNameLine, (void*)DIR_OUTCHANNEL, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"allowedsender", 0, eCmdHdlrCustomHandler, doNameLine, (void*)DIR_ALLOWEDSENDER, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"modload", 0, eCmdHdlrCustomHandler, doModLoad, NULL, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"includeconfig", 0, eCmdHdlrCustomHandler, doIncludeLine, NULL, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"umask", 0, eCmdHdlrFileCreateMode, setUmask, NULL, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"debugprinttemplatelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintTemplateList, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"debugprintmodulelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintModuleList, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"debugprintcfsyslinehandlerlist", 0, eCmdHdlrBinary,
NULL, &bDebugPrintCfSysLineHandlerList, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL));
CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL));
#endif
finalize_it:
return iRet;
}
/* print version and compile-time setting information.
*/
static void printVersion(void)
{
printf("rsyslogd %s, ", VERSION);
printf("compiled with:\n");
#ifdef FEATURE_REGEXP
printf("\tFEATURE_REGEXP:\t\t\t\tYes\n");
#else
printf("\tFEATURE_REGEXP:\t\t\t\tNo\n");
#endif
#ifndef NOLARGEFILE
printf("\tFEATURE_LARGEFILE:\t\t\tYes\n");
#else
printf("\tFEATURE_LARGEFILE:\t\t\tNo\n");
#endif
#ifdef USE_NETZIP
printf("\tFEATURE_NETZIP (message compression):\tYes\n");
#else
printf("\tFEATURE_NETZIP (message compression):\tNo\n");
#endif
#if defined(SYSLOG_INET) && defined(USE_GSSAPI)
printf("\tFEATURE_GSSAPI (GSSAPI Kerberos 5 support):\tYes\n");
#else
printf("\tFEATURE_GSSAPI (GSSAPI Kerberos 5 support):\tNo\n");
#endif
#ifndef NDEBUG
printf("\tFEATURE_DEBUG (debug build, slow code):\tYes\n");
#else
printf("\tFEATURE_DEBUG (debug build, slow code):\tNo\n");
#endif
printf("\nSee http://www.rsyslog.com for more information.\n");
}
/* This function is called after initial initalization. It is used to
* move code out of the too-long main() function.
* rgerhards, 2007-10-17
*/
static void mainThread()
{
DEFiRet;
uchar *pTmp;
/* doing some core initializations */
if((iRet = modInitIminternal()) != RS_RET_OK) {
fprintf(stderr, "fatal error: could not initialize errbuf object (error code %d).\n",
iRet);
exit(1); /* "good" exit, leaving at init for fatal error */
}
if((iRet = loadBuildInModules()) != RS_RET_OK) {
fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n",
iRet);
exit(1); /* "good" exit, leaving at init for fatal error */
}
/* Note: signals MUST be processed by the thread this code is running in. The reason
* is that we need to interrupt the select() system call. -- rgerhards, 2007-10-17
*/
/* initialize the default templates
* we use template names with a SP in front - these
* can NOT be generated via the configuration file
*/
pTmp = template_TraditionalFormat;
tplAddLine(" TradFmt", &pTmp);
pTmp = template_WallFmt;
tplAddLine(" WallFmt", &pTmp);
pTmp = template_StdFwdFmt;
tplAddLine(" StdFwdFmt", &pTmp);
pTmp = template_StdUsrMsgFmt;
tplAddLine(" StdUsrMsgFmt", &pTmp);
pTmp = template_StdDBFmt;
tplLastStaticInit(tplAddLine(" StdDBFmt", &pTmp));
pTmp = template_StdPgSQLFmt;
tplLastStaticInit(tplAddLine(" StdPgSQLFmt", &pTmp));
dbgprintf("Starting.\n");
init();
if(Debug) {
dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n");
debugging_on = 1;
}
/* Send a signal to the parent so it can terminate.
*/
if (myPid != ppid)
kill (ppid, SIGTERM);
/* END OF INTIALIZATION
* ... but keep in mind that we might do a restart and thus init() might
* be called again. If that happens, we must shut down the worker thread,
* do the init() and then restart things.
* rgerhards, 2005-10-24
*/
mainloop();
}
/* This is the main entry point into rsyslogd. Over time, we should try to
* modularize it a bit more...
*/
int main(int argc, char **argv)
{
register int i;
register char *p;
int num_fds;
int ch;
struct hostent *hent;
extern int optind;
extern char *optarg;
struct sigaction sigAct;
#ifdef MTRACE
mtrace(); /* this is a debug aid for leak detection - either remove
* or put in conditional compilation. 2005-01-18 RGerhards */
#endif
ppid = getpid();
if(chdir ("/") != 0)
fprintf(stderr, "Can not do 'cd /' - still trying to run\n");
/* END core initializations */
while ((ch = getopt(argc, argv, "46Ac:dehi:f:g:l:m:nqQr::s:t:u:vwx")) != EOF) {
switch((char)ch) {
case '4':
family = PF_INET;
break;
case '6':
family = PF_INET6;
break;
case 'A':
send_to_all++;
break;
case 'c': /* compatibility mode */
iCompatibilityMode = atoi(optarg);
break;
case 'd': /* debug */
Debug = 1;
break;
case 'e': /* log every message (no repeat message supression) */
logEveryMsg = 1;
break;
case 'f': /* configuration file */
ConfFile = (uchar*) optarg;
break;
case 'g': /* enable tcp gssapi logging */
#if defined(SYSLOG_INET) && defined(USE_GSSAPI)
if (!bEnableTCP)
configureTCPListen(optarg);
bEnableTCP |= ALLOWEDMETHOD_GSS;
#else
fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support");
#endif
break;
case 'h':
NoHops = 0;
break;
case 'i': /* pid file name */
PidFile = optarg;
break;
case 'l':
if (LocalHosts) {
fprintf (stderr, "rsyslogd: Only one -l argument allowed," \
"the first one is taken.\n");
} else {
LocalHosts = crunch_list(optarg);
}
break;
case 'm': /* mark interval */
if(iCompatibilityMode < 3)
MarkInterval = atoi(optarg) * 60;
else
fprintf(stderr,
"-m option only supported in compatibility modes 0 to 2 - ignored\n");
break;
case 'n': /* don't fork */
NoFork = 1;
break;
case 'q': /* add hostname if DNS resolving has failed */
ACLAddHostnameOnFail = 1;
break;
case 'Q': /* dont resolve hostnames in ACL to IPs */
ACLDontResolve = 1;
break;
case 'r': /* accept remote messages */
#ifdef SYSLOG_INET
AcceptRemote = 1;
if(optarg == NULL)
LogPort = "0";
else
LogPort = optarg;
#else
fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support");
#endif
break;
case 's':
if (StripDomains) {
fprintf (stderr, "rsyslogd: Only one -s argument allowed," \
"the first one is taken.\n");
} else {
StripDomains = crunch_list(optarg);
}
break;
case 't': /* enable tcp logging */
#ifdef SYSLOG_INET
if (!bEnableTCP)
configureTCPListen(optarg);
bEnableTCP |= ALLOWEDMETHOD_TCP;
#else
fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support");
#endif
break;
case 'u': /* misc user settings */
if(atoi(optarg) == 1)
bParseHOSTNAMEandTAG = 0;
break;
case 'v':
printVersion();
exit(0); /* exit for -v option - so this is a "good one" */
case 'w': /* disable disallowed host warnigs */
option_DisallowWarning = 0;
break;
case 'x': /* disable dns for remote messages */
DisableDNS = 1;
break;
case '?':
default:
usage();
}
}
if ((argc -= optind))
usage();
/* TODO: this should go away at a reasonable stage of v3 development.
* rgerhards, 2007-12-19
*/
if(iCompatibilityMode < 3) {
fprintf(stderr, "Warning: compatibility modes < 3 are currently NOT supported - continuing...\n");
}
checkPermissions();
thrdInit();
if ( !(Debug || NoFork) )
{
dbgprintf("Checking pidfile.\n");
if (!check_pid(PidFile))
{
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = doexit;
sigaction(SIGTERM, &sigAct, NULL);
if (fork()) {
/*
* Parent process
*/
sleep(300);
/*
* Not reached unless something major went wrong. 5
* minutes should be a fair amount of time to wait.
* Please note that this procedure is important since
* the father must not exit before syslogd isn't
* initialized or the klogd won't be able to flush its
* logs. -Joey
*/
exit(1); /* "good" exit - after forking, not diasabling anything */
}
num_fds = getdtablesize();
for (i= 0; i < num_fds; i++)
(void) close(i);
untty();
}
else
{
fputs(" Already running.\n", stderr);
exit(1); /* "good" exit, done if syslogd is already running */
}
}
else
debugging_on = 1;
dbgprintf("Compatibility Mode: %d\n", iCompatibilityMode);
/* tuck my process id away */
if ( !Debug )
{
dbgprintf("Writing pidfile.\n");
if (!check_pid(PidFile))
{
if (!write_pid(PidFile))
{
fputs("Can't write pid.\n", stderr);
exit(1); /* exit during startup - questionable */
}
}
else
{
fputs("Pidfile (and pid) already exist.\n", stderr);
exit(1); /* exit during startup - questionable */
}
} /* if ( !Debug ) */
myPid = getpid(); /* save our pid for further testing (also used for messages) */
gethostname(LocalHostName, sizeof(LocalHostName));
if ( (p = strchr(LocalHostName, '.')) ) {
*p++ = '\0';
LocalDomain = p;
}
else
{
LocalDomain = "";
/* It's not clearly defined whether gethostname()
* should return the simple hostname or the fqdn. A
* good piece of software should be aware of both and
* we want to distribute good software. Joey
*
* Good software also always checks its return values...
* If syslogd starts up before DNS is up & /etc/hosts
* doesn't have LocalHostName listed, gethostbyname will
* return NULL.
*/
/* TODO: gethostbyname() is not thread-safe, but replacing it is
* not urgent as we do not run on multiple threads here. rgerhards, 2007-09-25
*/
hent = gethostbyname(LocalHostName);
if(hent) {
snprintf(LocalHostName, sizeof(LocalHostName), "%s", hent->h_name);
if ( (p = strchr(LocalHostName, '.')) )
{
*p++ = '\0';
LocalDomain = p;
}
}
}
/* Convert to lower case to recognize the correct domain laterly
*/
for (p = (char *)LocalDomain; *p ; p++)
if (isupper((int) *p))
*p = (char)tolower((int)*p);
memset(&sigAct, 0, sizeof (sigAct));
sigemptyset(&sigAct.sa_mask);
sigAct.sa_handler = doDie;
sigaction(SIGTERM, &sigAct, NULL);
sigAct.sa_handler = Debug ? doDie : SIG_IGN;
sigaction(SIGINT, &sigAct, NULL);
sigaction(SIGQUIT, &sigAct, NULL);
sigAct.sa_handler = reapchild;
sigaction(SIGCHLD, &sigAct, NULL);
sigAct.sa_handler = domarkAlarmHdlr;
sigaction(SIGALRM, &sigAct, NULL);
sigAct.sa_handler = Debug ? debug_switch : SIG_IGN;
sigaction(SIGUSR1, &sigAct, NULL);
sigAct.sa_handler = SIG_IGN;
sigaction(SIGPIPE, &sigAct, NULL);
sigaction(SIGXFSZ, &sigAct, NULL); /* do not abort if 2gig file limit is hit */
(void) alarm(TIMERINTVL);
mainThread();
/* do any de-init's that need to be done AFTER this comment */
die(bFinished);
thrdExit();
return 0;
}
/*
* vi:set ai:
*/
Reference in New Issue View Git Blame Copy Permalink